Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Chino
Electric gate repair in Chino typically runs $185 – $475 depending on whether it’s a sensor alignment, control board issue, or a full operator replacement. Most calls we handle in Chino are completed the same day or next morning, with the price quoted and agreed before any work starts. If your gate is stuck open, stuck closed, or reversing on its own, call (866) 304-1321 and we’ll get a Chino-based technician out to diagnose it. We know the difference between a quick fix and a gate that’s reached the end of its service life, and we’ll tell you straight.
Why Lexington Gate Repair Is Chino’s Preferred Electric Gate Repair Company
Chino isn’t a one-size-fits-all gate market. The west side of town, around Eucalyptus Avenue and the ranch parcels south of Chino Airport, is full of heavy swing gates on horse properties. The newer subdivisions near The Preserve and College Park have builder-grade automatic gates that fail differently. Our team works both, and that mix of experience means we don’t misdiagnose a Chino gate problem by treating it like a generic one.
Nelson Arquette has built Lexington Gate Repair around one thing: electric gates. Not fencing. Not garage doors. Not general handyman work. Every tech we send to a Chino property works on gate openers and gate hardware every single day, and knows the error codes, wiring quirks, and failure patterns of LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. When you call us for Electric Gate Repair, you’re getting a specialist who’s seen your exact problem before, often on the same brand of opener sitting on your gate post.
We’re state-licensed and insured, and we stand behind the parts and labor on every Chino job. Quotes are free, and the number we give you before we start is the number on your invoice. No surprises, no upsell, no pressure.
Styles & brands we work with
Commercial Gate Operator in Chino
Commercial gate operator service in Chino is a different trade from driveway gate repair. When we work on a Chino HOA entrance, equestrian facility, or industrial yard gate, we’re dealing with operators designed for hundreds of cycles per day: DoorKing and FAAC slide operators, BFT hydraulic swing arms, Linear commercial openers. These units fail under Chino’s specific conditions: summer heat that pushes control boards past their thermal limits, and dust from the surrounding dairy and agricultural land that works its way into limit switches and gearboxes. A commercial gate that won’t close isn’t just an inconvenience, it’s a security and liability problem for the property manager.
We approach every commercial operator job in Chino the same way: diagnose the exact failure point, quote the repair or replacement, and get the gate cycling again without band-aid fixes that leave the board vulnerable to the next heat wave. Parts for Viking and FAAC commercial systems are ordered same-day, and most board or sensor replacements on Chino commercial gates are completed within one to two business days.
HOA and Community Gate Systems
Chino has a growing number of gated communities, and their operators run constantly. When an HOA gate in Chino goes down, every resident is affected. We prioritize these calls and work directly with property managers to document the repair, coordinate access, and keep the board informed on whether a repair will hold or a replacement is the smarter spend.
Industrial and Equestrian Facility Gates
Chino’s working equestrian and dairy operations use heavy slide gates and high-cycle operators. These gates collect dust and grit in ways a residential gate never will, and the operator has to work harder every cycle. We service commercial-grade linear and screw-drive operators and can retrofit existing gates with heavier-duty motors and upgraded safety loops when the current unit is undersized for the traffic it actually carries.
Gate Opener Repair in Chino
Gate opener repair in Chino is the most common call we answer across the city. An opener that won’t respond, grinds, or trips the breaker usually comes down to one of a few failure points: a worn capacitor, a failed control board, a stripped gear, or a motor pulling too many amps because the gate itself is binding. Chino’s weather makes it worse. The inland heat bakes electronics inside opener housings, and dry-season dust coats everything. We test the full system when we diagnose an opener problem in Chino, because replacing a board without finding out why it burned up just means another board dies in August.
If the opener is still worth saving, we repair it. If it’s an older unit that’s been repaired twice and the parts are obsolete, Nelson will tell you honestly and lay out replacement options on brands we know, including LiftMaster repair in Chino, FAAC, and Linear. You’ll get a written price before any parts are ordered or any work begins.
Obsolete Control Board Service
We still see 1990s-era LiftMaster and Linear openers running on Chino ranch gates. The motors are often fine. The control boards are not. If we can source a compatible board, we’ll quote it. If the board is truly obsolete and no aftermarket replacement exists, we won’t pretend otherwise. We’ll present a modern opener retrofit that keeps your existing gate and posts, and the cost is often close to what three failed board repairs would total.
Operator Retrofit on Legacy Gates
A lot of Chino’s older large-lot properties have gates that were hung decades ago, before current safety sensor requirements. The gate itself might be solid steel and worth keeping. The operator attached to it is a different story. We retrofit newer openers with modern UL 325-compliant safety photocells and force settings onto existing gates, which brings the system up to current safety standards without the cost of a full gate replacement.
Trusted Brands We Service in Chino
We work on your brand. That’s the whole point of calling a gate specialist instead of a generalist. Our Chino trucks carry common parts and sensors for LiftMaster, Linear, and Mighty Mule systems, and we order FAAC and Viking parts daily for commercial jobs. Whether it’s a Ghost Controls opener on a newer Preserve home or a DoorKing slide operator on a Chino industrial yard, the technician we send knows the system’s wiring, its error codes, and which aftermarket parts are safe to use. You won’t get a tech standing in your driveway watching a YouTube tutorial.
Common Electric Gate Repair Problems We See in Chino Homes
- Dust-choked safety photocells. Chino’s dry, dusty air coats the photocell lenses on gate sensors, especially on ranch properties where vehicle traffic kicks up dirt. A dirty safety sensor reads as an obstruction, so the gate reverses or refuses to close. We clean and realign the photocell, then confirm the opener’s safety logic is functioning correctly.
- Heat-failed control boards. Control boards inside Chino gate operators bake in the summer sun, and heat stress weakens solder joints and capacitors. A board that fails on a 105-degree day usually didn’t die that day; it was already dying. We test board voltage output before condemning it, so you’re not paying for a board replacement when the real issue is a failing transformer or limit switch.
- Sagging gates on settled hinge posts. Gates on Chino’s west side, especially swing gates that have seen decades of trailer traffic, sag when the hinge post footing settles into soft or compacted soil. The gate drags, the opener strains, and the opener motor overheats trying to move the extra resistance. We reset posts and replace worn hinges to get the load back where the opener can handle it.
- Slide track binding on equestrian properties. Ranch slide gates in Chino collect manure-laden grit in the track and on the rack, then the pinion binds and the motor pulls excessive amps. We clear the track, inspect the rack for wear, and adjust the opener’s force settings per manufacturer specification. If the track is bent or the rack is missing teeth, we’ll quote the replacement straight.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Chino, CA
Here are honest numbers for Chino, based on the work we do every week. A frozen or reversing gate fix like a photocell alignment or limit switch adjustment runs $185 – $275. Gate opener capacitor or gear replacement runs $225 – $395. Control board replacement on a residential opener runs $325 – $575, depending on the brand. Commercial gate operator repair in Chino typically starts at $425 and goes up based on the operator class and parts. A full operator replacement on a standard residential gate runs $850 – $1,800 installed. A heavy commercial operator replacement, like a DoorKing or FAAC slide unit, runs $2,200 – $4,500. What changes the price: the gate’s weight, the opener’s brand, whether the hinge or track issue must be fixed before the new operator goes in, and whether we’re retrofitting safety sensors onto an older gate. You get a fixed quote before work begins. Always. Call (866) 304-1321 and we’ll give you a free estimate over the phone, then confirm it on site.
We Also Serve Cities Near Chino
While this page is for Chino, our electric gate repair crews also cover Los Serranos, Ontario, Montclair, and Eastvale. If you’re just outside Chino and dealing with a gate that won’t open or a driveway operator that’s failing, check our Electric Gate Repair in Chino page for coverage details or call us directly at (866) 304-1321.
Serving Chino, CA — Our Local Coverage Area
We’re based in the Chino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Chino
Yes, in most cases. We retrofit modern UL 325-compliant safety photocells onto older LiftMaster openers regularly on Chino ranch properties. The key is confirming the opener’s control board has the terminal capacity for the sensor wiring; if it doesn’t, we’ll quote a board upgrade or a full operator swap with the new sensors included. Call (866) 304-1321 and we’ll tell you what your specific opener can take.
Usually cleaning and realigning fixes it, but we inspect before assuming. On Eucalyptus Avenue and the surrounding horse properties, tracks fill with dust and manure-laden grit that binds the slide. We clear the track, check the rack and pinion for wear, and adjust the operator’s force limits. If the track is bent or the rack is missing teeth, we’ll show you the exact damage and quote a replacement section rather than a whole new track.
Open the gate partway and watch where the sag begins. If the gate leaf itself tilts but the post stays plumb, it’s the hinges. If the post leans with the gate or you see cracking at the base of the post, the footing has settled and the post needs resetting. We see settled posts frequently on Chino’s west-side properties where truck and trailer traffic has compacted the soil unevenly. Call (866) 304-1321 and we’ll diagnose it on site.
Yes, and we see this almost daily in Chino. Dust from the surrounding land coats photocell lenses and blocks the infrared beam, causing the opener to read a false obstruction and reverse. We clean the lenses, confirm the beam alignment, and test the opener’s response. If the photocell keeps failing after cleaning, the issue is often a cracked lens or a wiring fault at the photoboard. To resolve it for good, call (866) 304-1321 for a service visit.
If the board is still available as a new or compatible aftermarket part, a board repair at $325 – $575 is usually worth it, especially if the opener is otherwise healthy. If the board is truly obsolete and no reliable replacement exists, repair isn’t honest advice. A full operator replacement runs $850 – $1,800 for most residential Chino gates, and we’ll show you that math before you commit. Call (866) 304-1321 for a free on-site assessment.
Call Lexington Gate Repair for Electric Gate Service in Chino
Your gate is a working piece of equipment, and in Chino it works hard. Heat, dust, livestock traffic, and years of use all take their toll. Whether it’s a sagging swing gate on a horse property, a commercial slide operator that won’t close, or a builder-grade opener that died in the summer heat, we diagnose it right and quote you a fixed price before any work starts. Call Nelson Arquette and the team at Lexington Gate Repair today at (866) 304-1321 for a free estimate. We serve every part of Chino, from the ranch parcels west of Euclid to the newer communities near The Preserve.
Written by Nelson Arquette, Owner at Lexington Gate Repair, serving Chino since the company’s founding.