Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Brea, CA
Gate installation in Brea means working with hillside lots, Santa Ana wind loads, and homes built as far back as the 1960s. We install automatic and manual gates for driveways, side yards, and property perimeters across 92821, 92822, and 92823, and we plan every job around the grade, the soil, and the wind exposure that comes with living in this part of Orange County. If your gate needs replacing or you’re adding one for the first time, call Lexington Gate Repair at (866) 304-1321 for a free on-site estimate.
Why Brea Homes Are Different
Brea isn’t a flat, easy build. The hillside neighborhoods like Olinda Village and Blackstone sit on north-facing slopes that catch the full force of the Santa Ana winds every fall. That wind doesn’t just rattle gates, it racks the frames, loosens hinge bolts, and eventually shifts posts out of plumb. We see far more gate failures here from wind fatigue than in the flat inland cities of Orange County, and any repair or replacement has to account for that repeated loading.
The housing stock adds another layer. Downtown Brea has a lot of 1960s and 70s tract homes where the original iron and wood driveway gates are now 40 to 60 years old, with hinge welds cracking and post bases rotting in the soil. Then there are the 1980s through 2000s planned developments up the hill where the gates were built better but are now 20 to 40 years in, and the operator arms, keypads, and safety sensors are reaching the end of their service life. In Olinda Village specifically, lots are steep enough that many gates sit on retaining walls or sloped driveways. When a gate sags there, it’s rarely just a hinge, it’s usually a settling post footing, and the fix has to be engineered for the grade or it will sag again within a year.
Permit and setback rules also shape the work. Brea enforces hillside fencing and setback requirements that affect where a gate post can sit and how tall the finished gate can be. We handle the installation details around those rules so the gate is placed legally the first time.
Styles & brands we work with
Our Main Brea Services
Most Brea homeowners call us for one of two reasons: a gate that won’t open or a gate that visibly needs to be rebuilt. Here’s how each service works in this city.
Gate Repair in Brea
Older iron and wood gates in Brea fail at predictable points: hinge welds near the post, latch assemblies that no longer align, and post bases that have loosened in the dry clay soil. We repair the structure back to working order, whether that means re-welding a cracked hinge, resetting a leaning post, or replacing rotted wood members inside the gate frame. On hillside properties we always check the post footings first, because in Olinda Village and Blackstone a sagging gate is usually a footing problem, not just a hinge problem. For the full scope of structural repair work we do in the city, see Gate Repair in Brea.
Electric Gate Repair in Brea
Automatic gate openers fail differently in Brea than they do inland. The dry, gusty Santa Ana season coats circuit boards and limit switches with fine dust, and the repeated wind load makes the motor work harder every cycle. We diagnose and repair electric gate systems on nine brands, including Ghost Controls, Mighty Mule, and LiftMaster on residential gates and DoorKing, FAAC, and BFT on HOA and commercial entrances. Because we’re brand-certified across that range, we read system-specific error codes instead of guessing. For the full scope of that work, see Electric Gate Repair in Brea.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Brea
Gate installation in Brea usually means one of two things: a new automatic gate for a driveway that’s never had one, or a full replacement of a 30-year-old iron gate that’s beyond repair. On hillside lots in Blackstone and Olinda Ranch, the critical part of any new install is the post footing – it has to be deep enough and wide enough to hold the gate against the Santa Ana wind load, or the whole assembly will move within two seasons. We’re a gate specialist, not a general contractor, so the entire job from footing to final programming stays under one crew. Learn more about the full scope at Gate Installation.
Automatic Gate Installation
Signs you need it
You want controlled access to your driveway without getting out of the car every time, or you need a gate that opens reliably for delivery drivers, guests, and residents in a multi-unit property.
What it costs in Brea
Automatic gate installation in Brea typically runs $1,925 to $3,280 for a single driveway configuration, depending on opener duty and whether new electrical service is needed at the post.
How we do it
We set the posts at the correct depth for your soil and wind exposure, hang and square the new gate, mount the opener in the right position for the hinge geometry, run power to the post, install safety edges and photo sensors, then program remotes, keypads, and the controller board.
Driveway Gate Installation
Signs you need it
Your existing driveway gate has cracked welds, rotted wood, or a post that’s visibly out of plumb, and repair would cost more than starting fresh with a gate sized to your driveway width.
What it costs in Brea
Driveway gate installation in Brea generally falls between $1,145 and $2,575, not including the operator if you’re adding automation at the same time.
How we do it
We remove the old gate, reuse only what’s still sound, set new posts if the old footings are undersized for the wind load, then hang the new gate and adjust hinges and latch so it swings cleanly and closes without slamming.
Electric Gate Installation
Signs you need it
Your property has a manual gate but you’re done with getting out to open it in the dark or the rain, or you’re adding a gate where security and controlled entry are the whole point.
What it costs in Brea
Electric gate installation in Brea runs $1,925 to $3,280 on average, with the final number tied to the opener brand, the gate’s swing distance, and whether power already reaches the gate location.
How we do it
We mount the operator to match the gate’s hinge geometry, run the electrical and low-voltage runs, install safety loops and photo sensors, and program the board to your remotes and any vehicle-detection equipment you want included.
What Gate Installation Costs in Brea
| Item | Typical range in Brea |
|---|---|
| Gate installation (labor + basic hardware) | $825 – $1,750 |
| Driveway gate installation | $1,145 – $2,575 |
| Electric gate installation (opener + automation) | $1,925 – $3,280 |
Does Gate Installation in Brea require a permit?
Yes, many Brea gate installations need a building permit, especially on hillside lots where setback and retaining-wall rules apply. We handle the permit application and inspection scheduling as part of the install, so the job isn’t delayed waiting on paperwork.
How long does a new gate installation take in Brea?
Most single-driveway installations in Brea are finished in one to two days once the permit clears and the gate is fabricated or delivered. Custom hillside work with new footings and electrical runs can stretch to three days, depending on grade and access.
Brands We Service in Brea
We’re factory-certified on nine gate opener brands, and in Brea we install and repair DoorKing, Elite, Mighty Mule, and LiftMaster most often on residential and light-commercial gates. Because we stock boards, arms, sensors, and remote hardware for these systems, most repairs don’t wait on a shipped part. See our brands for the full list and what each one is best at.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Brea, CA
| Service | Typical range in Brea |
|---|---|
| Gate repair (minor hinge/latch work) | $125 – $355 |
| Gate repair (moderate, incl. roller or weld work) | $335 – $655 |
| Gate repair (major, incl. post reset or realignment) | $625 – $1,145 |
| Electric gate repair | $150 – $545 |
| Gate installation (labor + basic hardware) | $825 – $1,750 |
| Driveway gate installation | $1,145 – $2,575 |
| Electric gate installation (opener + automation) | $1,925 – $3,280 |
What pushes the price up in Brea is usually the site, not the gate: steep grades, retaining-wall footings, and longer power runs from the house to the post. Every price is quoted and agreed to before any work starts, so the invoice never surprises you.
Neighborhoods We Serve in Brea
We run gate service and installation calls across all of Brea’s residential neighborhoods, from the flat 1960s tracts near downtown to the gated hillside communities up Carbon Canyon. Our typical response time for repair calls in Brea is same-day or next morning, depending on parts availability for older opener boards.
- Olinda Village
- Blackstone
- Olinda Ranch
- Downtown Brea
- North Hills
Service Area – Cities Near Brea
Lexington Gate Repair runs calls in Brea and the neighboring north Orange County cities. If your property is in one of these areas, we handle the same gate repair, electric gate repair, and installation work there: Placentia, CA, Fullerton, CA, Yorba Linda, CA, and La Habra, CA.
Serving Brea, CA — Our Local Coverage Area
We’re based in the Brea area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Brea
Most Brea repair calls are handled the same day or the next morning. If you’re in Olinda Village, Blackstone, or Olinda Ranch, our crew typically reaches you within an hour of dispatch, unless the repair requires a starter board or arm we need to pull from stock.
Yes. We service the DoorKing, FAAC, and BFT systems used at Brea HOA entrances and commercial access points, including loop detection, keypad programming, and vehicle exit sensors. We work with property managers to schedule repairs around resident traffic patterns.
We can give a ballpark over the phone, but an exact quote needs an on-site look at the grade, the existing posts, and the power situation. Estimates are free, and the price we quote before starting is the price you pay.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Brea Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Norma Rodriguez"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
— Gilbert Hernandez"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Grace Nguyen