Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across La Verne
Electric gate repair in La Verne typically runs $180 – $420 for most motor, opener, and sensor fixes, and many jobs we complete the same day we’re called. If your gate won’t open, crawls, or grinds when it moves, call (866) 304-1321 and we’ll diagnose it correctly the first time. We know La Verne’s gates: the old redwood ones off Bonita, the wrought-iron originals near Old Town, and the wide slide gates on rural acreage along Wheeler Avenue.
La Verne’s hot, dry summers and Santa Ana winds cause older redwood gates to warp and split, while the mild winters allow dry rot to go unnoticed until a hinge pulls loose under automatic operation. That’s a failure pattern we see here more than in Claremont or Pomona, where newer housing stock dominates. Nelson Arquette built Lexington Gate Repair to be the gate specialist La Verne calls when a house built in 1962 has a gate from 1985 that’s now automated with a 2016 opener. Three eras, one gate, and it all has to work together. That’s the job.
Key Takeaways
- Most electric gate repairs in La Verne cost $180 – $420, quoted and agreed before work starts.
- We service nine gate opener brands, including LiftMaster, DoorKing, Elite, and Mighty Mule.
- We handle solar-powered gate systems for rural La Verne driveways where running mains power is impractical.
- We work on historic redwood and wrought-iron gates in Old Town without gutting their character.
Why Lexington Gate Repair Is La Verne’s Preferred Electric Gate Repair Company
We’re a gate specialist, not a generalist. Every technician on our team works on gates and gate equipment daily. That matters when your opener is a DoorKing on a 1970s ranch home off Foothill Boulevard, or a LiftMaster on a commercial entrance near the University of La Verne. A general handyman can swap a hinge. Diagnosing why a gate binds at the halfway point, or why an operator’s limits are off after a power surge, takes someone who’s seen it before. We have.
La Verne homeowners and property managers call us because we work on their brand, not just “a gate.” Our certified service covers LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Stocking parts locally for La Verne jobs means we’re not waiting on a distributor in another county. When your gate is down, that speed matters.
Our Electric Gate Repair team focuses exclusively on gates. Repair, electric gate repair, and installation. That’s the whole business. So the tech who answers your call is the same one who knows what a Mighty Mule arm sounds like when its clutch is dragging, and what a FAAC board does when its capacitor is dying.
Styles & brands we work with
Automatic Gate Repair in La Verne
Automatic Gate Repair in La Verne runs $200 – $380 for most operator, arm, and limit switch work, with a typical repair finished in one visit. La Verne’s mix of 1950s – 1970s ranch homes and rural acreage means we see two distinct automatic gate profiles. The first: a mid-century driveway gate retrofitted with an opener that’s not quite matched to the gate’s weight. The second: a wide, heavy slide gate on a rural property that needs serious torque and a properly aligned rack.
Opener Retrofit Problems on Older Gates
When an older La Verne gate gets an automatic opener bolted on years after the gate was built, the operator and the gate rarely match. A gate that’s too heavy for the opener wears out the motor, the gearbox, or both. We see this a lot in the neighborhoods north of the 210 and south of Bonita Avenue.
Wide Gate and Rack Alignment
Slide gates on rural La Verne properties fail when the ground settles and the rack and pinion drift out of alignment. The gate starts to bind, then the gears strip. Catching that misalignment early saves the motor and the gear. If the gate shudders or makes a popping sound as it moves, don’t wait.
Electric Gate Motor in La Verne
Electric Gate Motor in La Verne typically runs $220 – $420 to repair or replace, depending on whether it’s a residential arm opener or a heavy-duty slide motor. La Verne’s long, wide driveways in the acreage areas off Wheeler and Live Oak Creek put more demand on gate motors than a standard suburban driveway in Pomona or Montclair. The motor has to work longer under load each cycle.
Solar-Powered Gate Motors for Rural Driveways
Some La Verne properties are hundreds of feet from the nearest power feed. Running conduit that distance is expensive. We install solar gate motors sized correctly for the gate’s weight and the number of cycles per day. The mistake we fix most often: a solar panel that’s too small for a heavy swing gate, especially during La Verne’s hot summers when battery efficiency drops and the gate slows to a crawl.
Motor Replacement vs. Repair
If the motor still spins but the gate doesn’t move, the problem is likely the drive assembly, not the motor itself. If the motor hums and trips the breaker, it’s likely done. We diagnose before we replace. Your price is quoted and agreed before any work starts.
Trusted Brands We Service in La Verne
La Verne homes and businesses run a range of gate operators. We service LiftMaster residential openers, DoorKing and Elite commercial and HOA slide gates, and Mighty Mule arms on smaller residential setups. Our team carries common parts for these brands on our local trucks, which cuts turnaround time when you need a repair on a gate off Damien Avenue or a property near the foothills. The brand on your opener tells us how it should behave. A LiftMaster that’s slow is a different problem than a DoorKing that’s slow. Our technicians read those differences. It’s the work.
Common Electric Gate Repair Problems We See in La Verne Homes
- Solar systems failing under load. Panels sized for a light gate get paired with a heavy farm gate on a rural drive. During hot La Verne summers, battery efficiency drops and the gate crawls or stops mid-cycle.
- Rack and pinion misalignment on slide gates. Ground settling from La Verne’s clay-heavy soil shifts the rack, the gears bind, and eventually the teeth strip. The gate gets louder as it fails.
- Dry rot in vintage redwood gates near Old Town. Decades of paint hide rot until a hinge pulls loose under the force of an automatic opener. These gates often need section repairs or custom-fit replacement rather than off-the-shelf parts.
- Safety sensor drift on older retrofits. Photo eyes and edge sensors installed on gates from the 1960s and 70s get knocked out of alignment or fail entirely, leaving the gate unsafe under automatic operation.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in La Verne, CA
Expect these ranges for common repairs in La Verne:
- Opener or motor repair: $220 – $420
- Control board replacement: $180 – $380
- Keypad or remote programming: $85 – $160
- Safety sensor repair: $95 – $210
- Rack and pinion alignment or repair: $150 – $350
What moves the price: the gate’s weight, whether it’s a slide or swing, whether the equipment is residential or commercial grade, and whether the repair needs custom fabrication for an older gate. The price we quote is the price you approve before any work begins. No surprises when the invoice arrives. Call (866) 304-1321 for a free estimate.
We Also Serve Cities Near La Verne
Our team works in La Verne and the surrounding communities, including Claremont, Pomona, Montclair, and Upland. If your gate is down and you’re near the La Verne border, call us. We’ll tell you straight whether we can get to you today.
Serving La Verne, CA — Our Local Coverage Area
We’re based in the La Verne area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in La Verne
For driveways too far from mains power to make running conduit practical, we install solar gate operators sized correctly for the gate’s weight and daily cycles. The key is matching the panel output and battery capacity to the gate, not the other way around. We’ve corrected plenty of undersized systems where a heavy gate ran a small panel into the ground during La Verne’s hot summers. Call (866) 304-1321 and we can evaluate your driveway setup and give you a real number.
Yes, but first we need to see the gate’s structure. Many of the redwood gates near Old Town have lived through decades of La Verne heat and are hiding dry rot under paint. If the frame is sound, we can automate it. If sections are compromised, we repair or rebuild those sections before mounting an opener. A motor on a rotted gate will tear itself apart, and the gate with it. Call (866) 304-1321 to have us look.
Automatic gates need photo eyes or edge sensors that prevent the gate from closing on a vehicle, person, or animal. If your gate has livestock or kids using the driveway, this isn’t optional. We install and align UL-listed sensors, and we test them under load before we leave. Call (866) 304-1321 if your gate reverses for no reason or doesn’t stop when something crosses the path.
That’s almost always a ground-settling problem under the track, or a rack and pinion that’s drifted out of alignment. La Verne’s clay soil shifts with the seasons, and a wide gate amplifies every inch of settlement. We re-level the track, re-align the rack, and replace worn wheels or rollers. If the gate has jumped more than once, don’t keep forcing it, the next failure will be the gearbox. Call (866) 304-1321 and we’ll set it right.
Once a year. La Verne’s heat, dust, and Santa Ana winds work on gate hardware year-round. A yearly service catches the rack drifting, the battery losing capacity, and the sensors drifting before any of it becomes a failure. For solar gates, check the panel and battery every six months. Call (866) 304-1321 to schedule a service visit.
Call Lexington Gate Repair in La Verne
Your gate keeps your property private and your kids and animals safe. When it fails, you need a specialist who knows your opener brand and knows La Verne’s gates. Nelson Arquette and the team at Lexington Gate Repair fix electric and automatic gates across the 91750 area daily. From Old Town redwood to rural slide gates off Wheeler Avenue, we know what’s under the housing, because we’ve seen it before.
Call (866) 304-1321 for a free estimate. We’ll diagnose the problem, quote the price, and get your gate moving again.
Written by Nelson Arquette, Owner at Lexington Gate Repair, serving La Verne’s gate repair needs with specialist knowledge of LiftMaster, DoorKing, Elite, Mighty Mule, and five more major brands.