Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Orange
Electric gate repair in Orange runs $180 to $340 for most opener and control board issues, and we can usually have a technician at your property the same day you call. If you live near the Plaza or off Chapman Avenue and your gate is stuck open, won’t close, or the motor hums but nothing moves, call (866) 304-1321 and we’ll diagnose it correctly the first time. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems daily, so the odds are good we already know your operator’s failure pattern before we arrive.
Orange is a city where gates are not just security. They’re part of the house. That matters when a repair needs to match a 1920s iron profile or a Craftsman-era wood gate that has been hanging since before the freeway came through. Our Electric Gate Repair team has spent enough time in the 92866 and 92865 ZIP codes to know when a hinge can be rebuilt and when the whole panel has to come down and go to the millwork shop.
Why Lexington Gate Repair Is Orange’s Preferred Electric Gate Repair Company
We’re a gate specialist, not a generalist. That distinction matters most on jobs like the 1960s steel slide gate we repaired on East Chapman Avenue. The LiftMaster operator had failed, but the real problem was the settled hinge post footing. A handyman would have swapped the motor and left the binding rack and pinion to destroy it again. We corrected the sag, replaced the operator, and added safety photocells to meet UL 325. The gate has run quietly ever since.
Orange customers call us because we stock parts locally and we don’t have to order a control board from across the country before we can even start. For older FAAC and BFT units, we keep retrofit boards and common sensors on the truck. That means fewer return trips and less time with your gate left open. Nelson Arquette built the company around that idea: show up with the right parts and the right knowledge, and the job gets done the first day.
Response time to Orange is typically under two hours for emergency calls during business hours. We cover every neighborhood from Old Towne to the east side tract streets, and we quote every repair before any work starts. No invoice surprises. Just a fixed number you approve before we turn a wrench.
Styles & brands we work with
Gate Access Control in Orange
Gate Access Control in Orange means something different here than it does in newer cities. In the 92866 and 92867 historic districts, we’re often integrating modern keypads, telephone entry, and vehicle detection loops onto gates that were swinging when Calvin Coolidge was president. The controls can be new; the gate itself has to stay what it is. That requires mounting hardware that won’t damage original ironwork and wiring runs that hide behind existing masonry rather than channeling through it.
For most Orange homes, adding or repairing access control runs $350 to $900 for keypad replacement, $400 to $1,200 for a full telephone entry or card reader integration, and $150 to $450 for a new radio receiver or antenna module. If you’re replacing an old clicker-only system with keypad entry, expect parts and labor in the $500 to $850 range.
Keypads and Card Readers
Older Orange properties often have worn keypad buttons or failed weather seals from direct sun exposure. We replace the membrane, reprogram codes on site, and test the unit through fifty cycles before we leave. Our Electric Gate Repair in Orange service includes access control on every job, not as an add-on.
Telephone Entry and Intercom Tie-Ins
If your gate has a call box that stopped ringing the house phone, it’s usually a dead power supply or a failed relay. We trace the low-voltage wiring, confirm the phone line or cell module, and replace only what’s actually failed. For commercial and HOA gates around Orange, we configure multi-tenant directories on DoorKing and Linear systems.
Commercial Gate Operator in Orange
Commercial Gate Operator work in Orange includes apartments on Tustin Street, office parks along the 55 corridor, and HOA entries throughout 92865 and 92867. These are heavier gates with higher daily cycle counts, which means we’re replacing motors before they seize, not after. A typical commercial swing gate operator replacement runs $1,800 to $3,500 installed, and slide gate operators run $2,200 to $4,200 depending on gate weight and duty cycle.
If your commercial gate is cycling slowly, making grinding sounds, or tripping its breaker, call before a full failure locks tenants out. We quote commercial repairs the same way we quote residential: fixed price agreed before work starts.
Swing and Slide Operators
Orange has a mix of both. Older apartment complexes lean toward slide gates with chain drive; newer builds use hydraulic or electromechanical swing arms. We service both and keep common Viking, FAAC, and BFT commercial parts in stock so we’re not waiting on freight.
Safety Loop and Photocell Repair
Commercial gates in Orange must meet current UL 325 safety standards. That means working vehicle detection loops, functional photocells, and proper force settings. We test all three on every commercial call and document the readings. If your gate reverses for no reason or won’t hold open, a failed loop detector is usually the cause, and it’s a $250 to $500 repair.
Trusted Brands We Service in Orange
We carry parts for the brands Orange properties actually use: FAAC, BFT, Linear, Viking, and the rest of the nine manufacturers we’re certified on. That matters when a control board fails on a Thursday and you don’t want your driveway open through the weekend. We’re factory-familiar with each system’s error codes and known failure points. When you call and tell us “the FAAC board is flashing twice,” we know what that means before we leave the shop. For Orange customers in the 92864, 92865, 92866, and 92867 ZIP codes, that translates to one visit instead of two.
Common Electric Gate Repair Problems We See in Orange Homes
- Wood gates that stick and strain the opener: Old Towne’s historic wood gates shrink in fall when Santa Ana winds blow hot and dry for days, then swell with winter rain. The opener works harder, the hinges crack, and eventually the motor burns out. We align and reinforce the gate before replacing the operator so the new motor isn’t fighting the same battle.
- Obsolete control boards on legacy operators: Many 1990s and early 2000s FAAC and BFT boards in Orange are reaching end of life. OEM parts are discontinued or backordered for months. We retrofit compatible boards, rewire the harness, and reprogram the system, typically for $220 to $450.
- Sagging wrought-iron gates with worn hinge posts: Around the Plaza and the numbered streets radiating off it, we see original decorative iron gates that have sagged a half inch or more. They bind on the latch and trip safety sensors. We weld or machine the hinge pins, reset the post, and realign the panel, usually without removing the scrollwork.
- Photocell and safety edge faults on older installations: Gates installed before modern safety standards often lack proper photo eyes or have dead edge sensors. In Orange, where many gates date from the 1970s and earlier, this is one of the first things we check. Retrofitting safety devices runs $180 to $400 per gate.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Orange, CA
Here’s what you can expect to pay in Orange based on the work we actually do:
- Service call and diagnosis: $75 to $125, waived when you approve the repair
- Opener motor replacement (residential): $450 to $1,100 installed
- Control board replacement or retrofit: $220 to $550
- Keypad or remote receiver replacement: $150 to $450
- Safety sensor or photocell replacement: $180 to $400
- Full operator replacement (commercial): $1,800 to $4,200
- Access control integration (keypad, telephone entry): $350 to $1,200
Your quoted price is agreed before we touch a screwdriver. We don’t quote low and bill high. Call (866) 304-1321 for a free estimate on your specific gate and operator. Nelson Arquette stands behind every quote we give in Orange.
We Also Serve Cities Near Orange
Our trucks cover the surrounding areas daily, including Villa Park, North Tustin, Tustin, and Anaheim. If you’re on the edge of Orange or just across a city line, the same crew and the same stocked parts are available. We know the streets and the gate styles in all of them, and we treat every call with the same fixed pricing and same-day response.
Serving Orange, CA — Our Local Coverage Area
We’re based in the Orange area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Orange
Yes, in almost every case. The sticking is usually from seasonal moisture cycling: Santa Ana winds dry the wood and widen gaps, then winter rain swells the boards so they bind. We strip hinges, reset posts, plane or scarf the binding sections, and reinforce joints so the gate swings freely. We only recommend full replacement when rot has compromised more than 30% of the structure. Call (866) 304-1321 and we’ll assess your gate in one visit.
Any automatic gate installed or significantly modified after UL 325 took effect must have photo eyes or an equivalent entrapment protection device, proper force settings, and a functioning manual release. Orange properties with gates from the 1940s through the 1980s often lack these. We retrofit the required sensors, adjust the operator’s force profile, and document compliance. Retrofitting safety devices typically runs $180 to $400 per gate.
If the control board is discontinued and the motor is over 15 years old, replacement is usually cheaper than repeated repairs. A new residential operator runs $800 to $1,600 installed; chasing rare parts can cost $500 plus weeks of delay. For Orange’s older FAAC and BFT units, we’ll give you an honest recommendation after diagnosis, and we only recommend replacement when the math actually favors it. Estimates are free.
Wrought-iron gates sag because original hinge pins wear and posts settle over decades, especially in Orange’s clay-heavy soil. The fix is to machine or weld new hinge barrels, reset the post, and realign the gate. We do this work with the scrollwork in place most of the time. Removing the panel would risk damaging the original ironwork we’re trying to preserve. Call (866) 304-1321 for a free assessment.
Yes, we install and repair keypads, card readers, telephone entry systems, and vehicle detection loops. For Orange’s commercial and HOA gates, we configure multi-tenant DoorKing and Linear directories, and for residential gates we pair keypads and smartphone modules with LiftMaster and Ghost Controls operators. Call (866) 304-1321 to talk through what your gate needs. Our estimates are free.
Contact Lexington Gate Repair in Orange
If your electric gate is stuck, slow, noisy, or won’t respond, call (866) 304-1321 now. We respond to Orange the same day in most cases, quote every repair before work begins, and send a gate specialist who knows your brand. Don’t leave your property open or your gate half-working: call us and we’ll have it diagnosed and fixed fast.
Written by Nelson Arquette, Owner at Lexington Gate Repair, serving Orange and surrounding communities.