Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Santa Ana
Electric gate repair in Santa Ana usually runs $180 to $450 for most opener, keypad, and sensor faults, with more involved work like control board replacement or commercial gate operator service landing between $500 and $1,200. We dispatch to Santa Ana within one business day for most calls, and our techs know the older gates on 1920s-1970s lots here better than anyone. If your gate won’t open, grinds, or trips its safety sensor, call us at (866) 304-1321 and we’ll diagnose it over the phone first.
Most Santa Ana calls are aging gates on small lots or shared driveways, not new construction. That matters because the fix is rarely just the motor. We check the posts, the rack and pinion, the track, and the photocells alongside the operator. Nelson Arquette has built Lexington Gate Repair around that exact discipline: diagnose the whole system, not just the part that made the noise.
Why Lexington Gate Repair Is Santa Ana’s Preferred Electric Gate Repair Company
Santa Ana homeowners call us because we work on their brand. The tech who shows up in 92701 or 92705 services LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers every week. That’s the difference between a gate specialist and a generalist: we read brand-specific error codes instead of guessing. In a city where most gates sit on block walls and posts set in expansive clay, misdiagnosis is expensive. We don’t do it.
Our Santa Ana callbacks constantly reference the same thing: the tech found the real cause fast. On one Bishop Street shared driveway in 92703, a LiftMaster slide opener was tripping on obstruction every morning. The gate itself was fine. The hinge-side post had heaved after winter rain and thrown the rack and pinion out of alignment. We reset and re-leveled the post footing, re-shimmed the rack, then re-aimed the safety photocell and tested the loop detector so the gate cleared the alley without blocking the neighbor’s car in. That’s the work Santa Ana gates actually need.
We don’t fence, we don’t do garage doors, we don’t take general handyman calls. Electric gate repair is the whole job. From a Gate Opener Repair on a Mighty Mule in a Floral Park bungalow’s yard to a commercial FAAC operator at an HOA entrance off Main Street, the same focused technician handles it from first assessment to final test.
Styles & brands we work with
Commercial Gate Operator in Santa Ana
A Commercial Gate Operator in Santa Ana is the motor and control system running an automatic gate at a multifamily building, HOA entrance, parking lot, or business driveway, and most local jobs involve FAAC, BFT, or DoorKing units that have been in service for years. In this market, commercial operator work typically runs $600 to $1,200 depending on the operator model, the extent of the control board or limit-switch repair, and whether the post or track has shifted. Property managers across 92701 and 92702 call us when a gate stops cycling reliably and tenants start propping it open. We diagnose the operator, the loop detector, and the safety edges together.
HOA and Multifamily Entrance Gates
Santa Ana’s older apartment courts and condo buildings run gate operators constantly, often on a shared access lane where no one wants the gate down during peak hours. We schedule commercial repairs around tenant access, and we carry common FAAC and BFT parts so most fixes happen same-visit. If the operator is beyond repair, we quote the replacement honestly and schedule the swap without a second contractor.
Heavy-Use Operators That Never Rest
A commercial gate in Santa Ana cycles hundreds of times a day. Limit switches drift, capacitors weaken, and safety loops get cut by repaving. We service the operator as a system: motor, board, edges, loops, and the physical track or rack. When we finish, the gate cycles clean and stays legal on entrapment protection.
Gate Opener Repair in Santa Ana
Gate Opener Repair in Santa Ana most often means the swing or slide motor runs but the gate doesn’t move correctly, or the opener trips, grinds, or won’t respond to the remote, keypad, or safety sensor. Most residential opener repairs here run $180 to $450. In older Santa Ana neighborhoods like Washington Square or the tract lots off Bristol Street, the opener is often blamed for what’s actually a shifted post or a warped gate panel putting load on the motor. We test the opener under real load before we quote anything.
Swing Gate Operators on Aging Posts
Santa Ana’s clay soil moves. After the rainy season, swing gate posts lean and the opener strains against a rack that’s no longer square. We fix the arm or ram alignment, re-anchor the post when it’s safe to do, and reset the travel limits so the motor stops fighting the gate. The operator usually wasn’t bad. It was being forced to do a footing’s job.
Slide Gate Operators in Tight Spaces
Where a swing gate won’t fit, Santa Ana homeowners run slide gates, often on shared driveways off streets like Flower or Raitt. Dust and grit work into the roller track, and the chain or rack drifts. We clean, re-tension, and re-align the drive gear, and we check the photocells so the gate never closes on a car or a person.
Trusted Brands We Service in Santa Ana
We’re certified on nine gate opener brands. The ones we see most across Santa Ana driveways and commercial lots are FAAC, BFT, Linear, and Viking, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters because a FAAC board fails differently than a Viking board, and a BFT hydraulic operator is not a Linear mechanical one. We keep the common parts for these brands on our trucks when we head into Santa Ana, so most opener repairs and keypad swaps happen on the first visit, not a week later. From a Ghost Controls on a solar residential gate to a DoorKing at a commercial lot off Dyer Road, we work on what you actually have. You can also read more about our Electric Gate Repair service hub for detail on the full scope.
Common Electric Gate Repair Problems We See in Santa Ana Homes
- Clay-heaved posts binding slide gates. After the rainy season, post footings in Santa Ana’s expansive clay heave and lean, so slide gates bind in their track and swing operators strain against a misaligned rack. We re-level the post footing and re-shim the rack rather than throwing a new motor at it.
- Hot, dry winds warping wood gate panels. The Santa Ana winds and dry summers split and warp older wood driveway and pedestrian gates, which throws the panel out of plane and drifts the operator’s limits and photocells. We re-true the panel or replace it, then re-aim the safety eyes.
- Wind-driven dust fouling tracks and pinions. Grit from Santa Ana’s dry season works into rack and pinion gears and roller tracks on slide gates, especially on shared driveways. The result is intermittent operator faults or a gate that jerks and stops, not a clean mechanical break.
- Rusted hinge posts at ground line. Iron gates across 92701 through 92707 rust where the post meets soil, worsened by winter rain after long dry stretches. A hinge that’s seized or a post that’s rotted at ground line loads the opener until it trips; we fix the post, not just the sensor.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Santa Ana, CA
Residential electric gate repair in Santa Ana typically runs $180 to $450 for most jobs: a keypad replacement, a remote reprogram, a safety sensor re-aim, a limit switch reset, or a hinge and post adjustment. Commercial gate operator service runs $600 to $1,200, reflecting larger operators, control boards, and loop detectors. Control board replacement on any brand usually falls between $300 and $650. We quote the full price before any work starts. If the job is a simple sensor or keypad, we tell you that over the phone and we don’t pad the ticket. Call (866) 304-1321 for a free estimate. The price you agree to is the price you pay.
This page is about Electric Gate Repair in Santa Ana specifically, and the way we price it reflects the housing stock here: older gates on small lots, shared driveways, and posts set in difficult soil, not suburban estate gates.
We Also Serve Cities Near Santa Ana
Our team handles electric gate repair across Santa Ana and the nearby cities of Tustin, North Tustin, Orange, and Villa Park. If your gate sits near the 5 or the 22, or anywhere from downtown Santa Ana up to the 92705 hills, we’ll get there fast.
Serving Santa Ana, CA — Our Local Coverage Area
We’re based in the Santa Ana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Santa Ana
Yes. We repair gates on shared Santa Ana driveways without closing off the neighbor’s access, and we plan the work around that from the start. For slide gates, we can often keep a pedestrian pass-through open or stage the repair so the gate swings free during the worst of it. Call (866) 304-1321 and tell us the driveway setup, and we’ll walk you through how we’ll sequence the repair.
In Santa Ana, the usual cause is a post footing that heaved after the rainy season. Expansive clay under the gate posts swells, the post leans, and the gate binds in the track even when the operator itself is fine. We check the rack and post alignment before we condemn any motor. If the footing moved, we re-level and re-shim it, and the gate rolls clean again.
Most of the time it’s the hinge or the post, not the operator. Hot, dry Santa Ana winds dry out wood gates and they warp, while iron hinge posts can rust at ground line after winter rain. The operator then strains against a gate that’s no longer square. We’ll fix the hinge or the post first, then re-set the travel limits and test the safety sensors. If you need a real number, call (866) 304-1321 for a free estimate.
Yes. Automatic gates in Santa Ana, like everywhere in California, must have working entrapment protection: safety photocells, contact edges, or both depending on the gate type and operator. We test and re-aim the existing sensors on every repair, and if the gate never had proper edges, we’ll quote what’s needed to bring it into compliance. It’s not optional, and it’s not something to disable to keep the gate running.
Yes. Solar gate openers are common on Santa Ana lots where the gate sits far from the panel or a trench through the yard isn’t worth the cost. We service Ghost Controls and Mighty Mule solar systems, including the panel, charge controller, battery, and the opener itself. If the battery has aged out from heat, we’ll swap it. The operator is usually fine; the power system isn’t.
Call Lexington Gate Repair for Electric Gate Service in Santa Ana
If your gate is binding, tripping, or dead in Santa Ana, call us at (866) 304-1321. We’ll ask about the brand, the symptom, and what kind of driveway you have, then give you a straight answer and a free estimate before any work starts. Nelson Arquette and the team at Lexington Gate Repair stay focused on one thing: your gate, diagnosed correctly the first time.
Written by Nelson Arquette, Owner at Lexington Gate Repair, serving Santa Ana and Orange County.