Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Tustin
A failed electric gate motor in Tustin typically costs $280 – $520 to repair, and a full operator replacement usually runs $750 – $1,400 depending on the drive type and brand. We diagnose most Tustin calls the same day and carry the parts to get your gate running again without a second trip. Whether your gate guards a 1950s ranch off Newport Avenue or a Tustin Ranch cul-de-sac in 92782, we work on the system you have, not the one we’d prefer to sell you. Call (866) 304-1321 and tell us what the gate is doing (or not doing), and we’ll give you a straight answer.
Lexington Gate Repair has spent years working the split personality of Tustin’s gate market: the mature, tree-lined streets around Old Town and the 92780 core, full of original iron and wood gates on aging posts, and the newer HOA-governed villages of 92782, where a replacement part has to match the association’s approved palette or it doesn’t get approved. We know both worlds because we work in both several days a week.
Why Lexington Gate Repair Is Tustin’s Preferred Electric Gate Repair Company
Tustin homeowners and property managers call us because we’re a gate specialist, not a generalist. Every technician we send to Tustin is factory-trained on the brands that dominate this market: FAAC and BFT on commercial and HOA systems, Linear on mid-century residential arms, LiftMaster and Viking across the board. That means when a Electric Gate Repair call comes in from a Tustin Ranch property manager, we’re not reading the manual for the first time on their driveway. We’ve already seen that exact failure mode.
Tustin’s gate hardware doesn’t age the same way from one neighborhood to the next, and reviews from Tustin customers consistently mention the same thing: the tech knew the gate better than the owner did. In Old Town, that means diagnosing a dropped ornamental leaf as a shifted hinge post footing rather than a dying motor. In Tustin Ranch, it means knowing which drive brands meet HOA sound and speed limits and which gate hardware finishes match the approved RAL colors. Our response time to Tustin is short because our primary dispatch runs through Chino and the 55 freeway corridor daily. When a gate fails, the security of the property fails with it.
We’re led by Nelson Arquette, who built Lexington Gate Repair around one principle: if a gate can open and close automatically, it deserves a tech who knows exactly how it was supposed to work when it left the factory. Nelson’s approach to Tustin’s older ranch gates is simple. Fix the post first, then talk about the motor. That discipline is why our Tustin customers don’t get repeat calls on the same gate six weeks later.
Styles & brands we work with





Electric Gate Motor in Tustin
An electric gate motor in Tustin deals with extreme inland heat, Santa Ana wind gusts, and on older properties, decades of deferred hinge maintenance. When the motor runs but the gate drags or stalls, the motor is often fine; the leaf is binding on a rotted post or warped wood. Motor repair in Tustin runs $280 – $520, and a full replacement with a new operator runs $750 – $1,400 installed, depending on the drive type and brand. We quote your exact price before any work starts.
Underground and Cantilever Systems
Underground operators on high-end Tustin properties fail differently than pad-mount arms. Water and soil movement around the burial box, a cracked hydraulic line, or a shifted mounting plate all produce the same symptom as a dead motor. We test the full mechanical path before swapping a board, because on a custom ornamental gate off a ranch property near Old Town, the post footing was the problem, not the LiftMaster arm. We re-set and re-poured the footing, corrected the sag, then re-synced the arm so the heavy fabricated leaf cycled silently again. The homeowner had been ready to pay for a new operator; they needed a footing repair and a re-sync instead.
Swing Gate Drive Alignment
Swing gates on Tustin’s mid-century ranch homes rarely fail at the motor first. The original hinge posts shift, rot, or both, and the panel starts dragging at the latch edge. That drag overloads the operator and burns out the gears or capacitor. We address the mechanical alignment before touching the drive, so a repaired motor isn’t installed onto a doomed gate. The result is a gate that cycles quietly, the way it did when the house was built.
Gate Access Control in Tustin
Gate access control in Tustin covers the keypads, remotes, intercoms, and safety sensors that tell the operator when to move and when to stop. Repair ranges from $120 for a single remote programming call to $400 – $850 for keypad replacement, sensor replacement, or control board work on a multi-access system. Tustin Ranch HOA gates frequently run DoorKing or BFT access controllers, and we program those per the association’s approved access list, not our own best guess.
HOA Access Control Requirements
In 92782, access control repairs must match the association’s approved hardware list. A wireless keypad that isn’t the approved model gets flagged at the next architectural review. When we replace a keypad, card reader, or sensor on a Tustin Ranch gate, we spec the part to the HOA’s published standards so the repair isn’t undone a month later. The same applies to gate finish colors: a mismatched keypad housing on a dark bronze gate catches the eye from thirty feet.
Intercom and Camera Entry Systems
High-end Tustin estates with matched intercom and camera entry require the access control and the gate motor to communicate on the same protocol. We see properties with a BFT operator and a third-party intercom that stopped triggering the gate after a firmware update. We correct the protocol timing, re-set the photo eye sensitivity for the longer driveway approach, and test the full sequence with the homeowner’s own remote and intercom handset before we leave.
Trusted Brands We Service in Tustin
We work on your brand, not whatever happens to be in the truck. Our Tustin fleet carries parts for FAAC, BFT, Linear, and Viking systems, plus full-stock support for LiftMaster, Ghost Controls, and DoorKing. If your gate is powered by FAAC and your neighbor’s is a 1990s Linear, that’s a normal day for us. We keep brand-specific capacitors, limit switch kits, and receiver boards on hand for the operators Tustin homes actually use, which means we can often finish the repair in one visit instead of ordering a part and making you wait a week with a gate stuck open. No handyman truck carries that depth of specific inventory, because no handyman needs it every day. We do.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Tustin Homes
- Shifted hinge posts on mid-century gates. Original iron and wood gates in the 92780 core were often set on unreinforced concrete footings that have moved over 60 years. The panel sags, the latch misaligns, and the motor burns itself out trying to push a gate that no longer swings freely.
- Warped and baked wood and vinyl leaves. Tustin’s intense inland summer sun plus Santa Ana wind cycles dry out wood gates until they twist, and bake vinyl gates until they distort. A warped leaf fights the operator on every cycle, which murders swing gate arm bushings and rack and pinion teeth.
- Corroded hinges and seized hardware from marine-layer mornings. Tustin’s overnight coastal fog settles on iron gates and hinges, dripping corrosion into any seam. Couple that with winter rain and older wrought-iron hardware seizes up, so the motor strains against a hinge that used to move freely.
- HOA-mandated replacements that don’t match the palette. In Tustin Ranch, a repaired or replaced gate piece that doesn’t match the association’s approved color and style gets rejected at review. Homeowners who hired a non-specialist often pay twice: once for the mismatched repair, and again for us to redo it correctly.
Pricing for Electric Gate Repair in Tustin, CA
Here’s what Tustin homeowners actually pay. Electric gate motor repair runs $280 – $520. A full operator replacement runs $750 – $1,400 installed, depending on whether you need a pad-mount arm, an underground drive, or a commercial-grade operator for a heavy fabricated leaf. Keypad replacement and access control repairs run $400 – $850. Remote programming starts at $120. Safety sensor replacement runs $160 – $240 per sensor. The price we quote is the price you pay: we confirm the number before we turn a wrench, and we never add labor after the fact without calling you first. Estimate is free. Call (866) 304-1321 for an exact quote on your gate.
We Also Serve Cities Near Tustin
Our Tustin customers often ask us to cover neighboring properties. We run Electric Gate Repair in Tustin daily and also service North Tustin, Santa Ana, Orange, and Villa Park. If you own a rental, a family member’s property, or a commercial lot just outside Tustin’s zip code boundary, call us at (866) 304-1321 and we’ll confirm coverage and a time slot.
Serving Tustin, CA — Our Local Coverage Area
We’re based in the Tustin area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Tustin
It’s usually the gate, not the motor. In Tustin’s 92780 core, the original hinge post footings on mid-century iron gates have often shifted or rotted, which drops the leaf and makes it drag. The motor is working fine; it’s just overloaded by a gate that no longer swings on its geometry. We fix the post first, then test the operator. Call (866) 304-1321 and we’ll tell you exactly what’s wrong before any work starts.
Yes. Underground operators on custom drive gates in Tustin are one of our core service areas. We handle hydraulic and electromechanical underground drives, including re-setting the burial plate, replacing worn drive shafts, and re-syncing the operator to the leaf’s hinge geometry. These systems demand precision: a heavy fabricated leaf on an underground drive has to cycle silently, and the tolerance for misalignment is zero. We test until it does.
Yes. In 92782, replacement hardware has to match the HOA’s approved architectural palette, including color, finish, and often the specific brand model. We spec parts to the association’s published standards before installation, and we’ve handled enough Tustin Ranch gates to know which operators and keypads are on the approved list. That saves you a rejection letter and a double repair bill. Call (866) 304-1321 and mention your HOA’s standards; we’ll confirm the part matches before we order it.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Tustin specifically, we see a lot of FAAC and BFT on HOA and commercial systems, Linear and LiftMaster on older residential arms, and Viking on heavy slide gates. If your gate runs on one of these brands, we know its failure modes and we carry the parts. If it runs on something else, call us anyway at (866) 304-1321; we’ll tell you over the phone whether it’s something we can service.
We test the full safety loop before we leave: photo eyes, edge sensors, reversing sensitivity, and the manual release. On every repair, we cycle the gate through a test object at multiple points in its travel to confirm the operator reverses immediately on obstruction. On Tustin homes with kids or pets near the gate, we also set the closing force low enough that the gate stops rather than crushes. Safety is part of the repair, not an upsell. Call (866) 304-1321 and we’ll walk you through what we test.
If your electric gate is down in Tustin, don’t wait for the sag to get worse. Call Lexington Gate Repair at (866) 304-1321 for a free estimate, and talk directly to Nelson Arquette about your gate. We work on your brand, we fix the post before the motor, and we stand behind the work.
Written by Nelson Arquette, Owner at Lexington Gate Repair, serving Tustin since day one of the company.