Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Placentia
Gate repair in Placentia usually comes down to one of two jobs: getting a metal or wood gate swinging and latching true again on an older side-yard driveway, or getting an electric opener working on a gate that hasn’t been serviced in years. Most Placentia calls we handle are diagnosed and fixed the same day. If you’re off Bradford Avenue, in the Old Town pocket, or anywhere in 92870 or 92871, call (866) 304-1321 and we’ll send a gate specialist who knows this city’s lots, its clay soil, and the way its gates fail.
Why Lexington Gate Repair Is Placentia’s Preferred Gate Repair Company
We work exclusively on gates. That’s the whole business. No fencing side jobs, no general handyman calls. Our Gate Repair team spends every working day on swing gates, slide gates, electric operators, hinges, posts, and the concrete problems underneath them. For Placentia homeowners that matters because the housing stock here predates modern gate standards. Many of the gates we service in Placentia hang off wooden posts set in original 1950s or 1970s concrete that has cracked and settled over decades in the clay-heavy soil.
Nelson Arquette leads our team, and he trains every technician to diagnose the ground under a gate before adjusting the hardware. That’s the difference between a repair that lasts and one that gets called back in six months. When a Placentia driveway gate drags, the panel is rarely the only problem. The post footing, the concrete apron, or the track has usually moved. We look at all three before we touch a hinge. Our customers in Placentia call us back when the other gate fails, not because our first repair didn’t hold.
Response time to Placentia is typically the same day for non-emergency calls and within hours for a gate that won’t open at all. We know the side streets off Chapman Avenue, the tract homes near Golden Elementary, and the long driveways off Yorba Linda Boulevard. You won’t be explaining your lot layout to a technician who’s never seen a Placentia parcel.
Styles & brands we work with
Metal Gate Repair in Placentia
Metal Gate Repair in Placentia is usually about a wrought-iron or steel gate that has sagged, dragged, or pulled loose from a post that has settled in the city’s clay soil. The gate panel itself might be fine. The hinges, the post, or the concrete apron under the gate has moved. On the deep narrow 92870 lots, a metal pedestrian gate often shares a post with the driveway gate, so when one post twists, both gates bind. We realign the panel, replace or reset the hinges, and when the post footing is the problem, we re-anchor it so the gate isn’t dragging again next season.
Hinge and Post Resets on Settled Clay
Original wooden posts set in 1950s or 1970s concrete are the most common failure point we see in Placentia. The clay expands and contracts through the wet-dry cycle, the concrete cracks, and the post leans. Weld-and-shim fixes on the gate don’t address that. We reset the post plumb, pack new concrete around it, and only then rehang the gate. A metal gate that dragged for a year is often corrected in an afternoon.
Weld and Rust Repair for Wrought Iron
Placentia’s dry inland air is easier on iron than coastal salt, but the occasional winter rain still gets into joints and hinge plates. We cut out rusted sections, weld in matching stock, and repaint to match the existing finish where practical. A decorative wrought-iron gate off Bradford Avenue should look like it belongs there, not like it got a patch job.
A typical metal gate repair in Placentia runs $240 to $600 depending on the hinge count, the post condition, and whether welding is required. A post reset adds $180 to $350. We’ll quote you before any work starts, not after.
Wood Gate Repair in Placentia
Wood Gate Repair in Placentia is driven by the seasonal cycle this city knows well. Hot Santa Ana winds and months of rainless summer dry out wooden gate panels and posts; then a week of winter rain swells them shut. A gate that latched cleanly in August won’t close in January. The repair usually involves planing or trimming the swollen edge, resetting hinges on shifted posts, and sometimes sistering a cracked rail. On older Placentia homes near Old Town, wood gates often hang on posts that have been in the ground since the Eisenhower administration. We work around the established landscaping, so the gate swings clear without ripping out what’s been growing there for decades.
Swelling and Sticking Repairs
When a wooden gate swells shut after rain, the quick fix is trimming the edge. The lasting fix is understanding why it swelled that direction. On a Placentia side yard where the concrete has heaved, trimming a gate that’s actually ground-bound won’t help. We check the clearance at the bottom and the latch side, then adjust what’s actually binding.
Rail and Post Rot Around Old Concrete
Wood posts set directly into old concrete collect water at the base. Rot starts there and travels up through the end grain. We replace the rotted section, set the new post on a proper gravel base inside the existing concrete collar where possible, and rehang the gate. The goal is a gate that opens with one hand again.
Wood gate repair in Placentia typically runs $180 to $420. Full post replacement with concrete work runs $250 to $500. Estimates are free and quoted before we begin.
Trusted Brands We Service in Placentia
We’re certified on the openers Placentia homes and HOAs actually use, including FAAC, BFT, Linear, and Viking. That matters when the service call isn’t about the gate panel at all but about the operator. A FAAC unit on a Placentia Hills HOA entrance behaves differently from a Viking on a single-family driveway in 92870, and the error codes aren’t interchangeable. We stock common parts for these brands locally, so a bad control board or a worn limit switch doesn’t automatically mean waiting on a factory shipment. Your gate, diagnosed correctly the first time.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Placentia Homes
- Slide gates jumping the rack and pinion. On tight side-yard driveways in 92870, the concrete apron under a slide gate has often heaved from tree-root pressure. The track tilts, the rack separates from the pinion, and the gate stalls or grinds. A tech who only tightens the rack bolts sends the same problem back in a month.
- Wood gates swelling shut after winter rain. Months of Santa Ana-dry weather shrink the panel, then the first real rain swells it shut against the post. We trim and reseal so the next storm doesn’t lock the gate again.
- Hinge-post rot in original concrete. Placentia’s original wood posts were set in concrete that’s now cracked and settled. The panel gets blamed, but the post footing has moved. We reset the post before rehanging the panel.
- Operator arms stressed by Santa Ana gusts. Tall wrought-iron gates catch wind like a sail. Repeated gusts flex the hinge plates and the operator arm until a bolt shears or the gate binds mid-travel. We reinforce hinge plates and check operator travel limits on every tall-gate repair.
Pricing for Gate Repair in Placentia, CA
Here are the honest ranges for Placentia, based on what we actually bill. Wood gate repairs run $180 to $420. Metal gate repairs run $240 to $600, not including post reset work, which adds $180 to $350 when the footing has moved. Electric gate and operator repairs run $160 to $550 depending on the brand and the failed part. Full gate installations start around $1,800 for a basic single-drive swing gate and run higher for slide gates, custom iron, or operator retrofits. What changes the price is what we find underneath: heaved concrete, settled posts, outdated operator wiring. The quote is fixed before any work starts. Call (866) 304-1321 for a free estimate.
We Also Serve Cities Near Placentia
Our gate specialists cover Placentia daily and also take calls in Brea, Anaheim, Fullerton, and Yorba Linda. If you manage a property across these cities or live near a border street, you don’t need a different gate company on the other side of the line. For gate work anywhere in or near Placentia, one call covers it.
Serving Placentia, CA — Our Local Coverage Area
We’re based in the Placentia area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Placentia
Yes, and in most Placentia side yards a slide gate is the better option. Deep, narrow lots between the house and the property line often don’t have enough width for a swing gate’s arc. A slide gate runs parallel to the fence line on a track, so it needs no clearance swing. The catch is the track has to sit on stable ground. If the concrete apron has heaved, we fix the slab or re-anchor the track before installing the operator. Call (866) 304-1321 and we’ll tell you whether your lot fits a slide gate, and what it would cost.
The most common reason in Placentia is that the gate is not just swelling; it’s sitting on ground that has moved. Winter rain swells the wood, and if the concrete under the gate has heaved from settled clay or tree roots, the panel is binding against the ground, not just the post. Adjusting hinges won’t fix a dragging bottom edge. We cut the swollen edge, then fix the clearance issue underneath so the gate doesn’t bind again next winter. Call (866) 304-1321 and we’ll diagnose it on site.
Usually not. On Placentia gates we see this constantly: a sagging metal or wood gate is almost always a post problem or a hinge problem, not a panel problem. The panel is rigid; what moves is the footing under the post, or the hinge plates themselves have worn. We check the post plumb first, then the hinges and the ground clearance. Fixing the panel without addressing the post means redoing the job in a season. Call (866) 304-1321 for an inspection, and we’ll quote the real fix.
Yes. We are certified on FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule, so whatever operator is already on your Placentia gate, we work on your brand. The operator is often the most expensive single component on the gate, and misdiagnosis costs you parts and downtime. We read brand-specific error codes and source the right part the first time. Call (866) 304-1321 and tell us the brand; we’ll tell you whether we can fix it same day.
In most cases, yes. For slide gate repairs we often move the gate to the open position and work around it, so you can still get cars in and out. For swing gate repairs we typically prop the gate open or remove the panel only if it’s already dragging. On commercial and HOA sites in Placentia we coordinate an access plan before we start, because the gate has to keep working for residents and service vehicles. We’ll tell you the plan when we quote the job, and the phone number is (866) 304-1321.
Need a gate specialist in Placentia today? Call (866) 304-1321 for a free estimate. We’ll quote the price before any work begins, and we’ll send someone who knows gates, operators, and Placentia’s narrow lots.
Written by Nelson Arquette, Owner at Lexington Gate Repair, serving Placentia and North Orange County.