Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Access Control Cost in Chino?
Gate access control in Chino typically runs $1,200 to $2,400 for a basic residential keypad and entry system, while full systems with telephone entry, video, and multiple readers land between $3,500 and $12,000. Commercial and HOA systems on multi-tenant properties usually start around $6,000 and climb past $20,000 for larger installations. Those ranges cover hardware plus professional installation, not ongoing monthly service plans.
We’re Lexington Gate Repair, and gate access control is one of only three things we do. If you’d like a real number for your property, call (866) 304-1321 and we’ll walk your entry point with you.
Key Takeaways
- Basic residential access control in Chino: $1,200 to $2,400 installed.
- Mid-range residential with video/intercom and multiple codes: $2,500 to $5,000.
- Commercial, HOA, and multi-building systems: $6,000 to $20,000+.
- Repairing an existing system often costs $200 to $900 – far less than a full replacement.
- We service the full brand spectrum, from residential openers (Ghost Controls, Mighty Mule) to commercial systems (DoorKing, FAAC, BFT), so we diagnose before we recommend anything.
Gate Access Control Cost Breakdown (2026)
The 2026 ranges below reflect what we’re seeing on Chino jobs, from new installations to systems upgraded for tighter security.
| System Component / Service | Typical Installed Cost (Chino, 2026) |
|---|---|
| Basic keypad + entry controller (residential) | $1,200 – $2,400 |
| Telephone entry system (residential, single door) | $1,400 – $2,800 |
| Video intercom + gate release | $1,800 – $4,000 |
| Multi-code / proximity card reader | $900 – $2,200 per reader |
| Operator motor (liftmaster-style residential swing or slide) | $1,600 – $3,200 |
| Commercial-grade operator (FAAC, DoorKing, BFT) | $3,500 – $8,500 |
| Battery backup / power supply | $400 – $1,200 |
| Basic residential system (all-in) | $1,200 – $2,400 |
| Mid-range residential system (all-in) | $2,500 – $5,000 |
| Commercial / HOA level system (all-in) | $6,000 – $20,000+ |
| Repair and diagnostics (existing system) | $200 – $900 |
What pushes cost up: the number of access points, the type of reader (keypad vs. proximity card vs. video), whether the gate needs a new operator motor as part of the job, and the level of integration you want (phone app, visitor log, remote release). What pulls cost down: reusing an existing operator in good shape, keeping it to a single keypad and single entry point, and fixing a controller or reader rather than replacing the whole system. On a Chino job, a mid-range residential system is usually the sweet spot – replace the aged keypad and add a video intercom without touching a healthy operator.
What Affects Gate Access Control Pricing in Chino
- Number of entry points. A single driveway gate costs less than a community with vehicle, pedestrian, and service gates. Each additional reader adds hardware and labor.
- Reader technology. Keypads are the least expensive. Proximity cards, video intercom, and telephone entry all cost more to install and wire.
- Operator condition. If the existing swing or slide operator is failing, replacement (e.g., a DoorKing or FAAC unit) adds $3,500 to $8,500. If it works, we build access control around it.
- Brand ecosystem. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Sticking with a brand your property already runs can cut costs because parts and wiring integration are simpler.
- Commercial vs. residential. Commercial gates carry heavier-duty operators, more readers, and more wiring – the main reason commercial systems cost 3x to 5x a residential job.
- Power and wiring distance. Chino properties with gates set far from the house or main panel often need longer runs, plus conduit or a battery backup, which adds labor.
Residential vs. Commercial Gate Access Control Pricing
A single-family home in Chino usually needs a good keypad, a working operator, and maybe a video intercom for deliveries and family. That lands in the $1,200 to $5,000 range. Most homeowners stop at a keypad and entry controller.
A commercial or HOA property needs more: multiple tenants or units, visitor call boxes, audit trails, and heavier-duty operators. That’s where $6,000 to $20,000 becomes normal, and larger multi-building setups can exceed it. We handle both ends of that spectrum because the brands differ. Ghost Controls and Mighty Mule are common on residential driveways; DoorKing, FAAC, and BFT show up all over commercial and HOA work. Knowing which system is on your property before we arrive saves you a second visit and a lot of guesswork. If you’re planning around a bigger entry project, see our full guide to Gate Access Control in Chino for how the pieces fit together.
How to Save on Gate Access Control
- Repair before replacing. A reader or controller that’s acting up is often fixable for $200 to $900. Don’t buy a new system until we’ve diagnosed the old one.
- Keep your existing operator if it’s healthy. Access control hardware is far cheaper than a new operator motor. Only replace the operator if it’s failing.
- Start with one entry point. Add readers later as budget allows. A working single keypad beats a half-installed multi-point system.
- Stay with a brand your property already runs. Matching your existing DoorKing, FAAC, or LiftMaster setup means fewer surprises in parts and wiring.
- Get a free estimate before you commit. We’ll price the job in person, line by line, so you can compare apples to apples. Call (866) 304-1321.
Repair vs. Replacement: Which Costs Less in Chino?
Repair almost always costs less – a controller, reader, or keypad issue usually runs $200 to $900. Replacement makes sense when the operator motor is failing or the system is too old to support the access features you want (video, cards, phone app). Our rule of thumb: if the operator is under roughly 10 years old and the electronics are the only problem, repair. If the whole system is on its last leg, we’ll price replacement honestly and compare it against a repair so you can decide.
FAQs – Gate Access Control Cost in Chino
How much does a gate access control system cost in Chino?
A residential system typically runs $1,200 to $5,000, and commercial or HOA systems run $6,000 to $20,000+ depending on the number of readers, operators, and integration. Call (866) 304-1321 for an exact quote – estimates are free.
Is it cheaper to repair or replace my gate access system in Chino?
Repair is almost always cheaper – usually $200 to $900 for a controller, keypad, or reader fix versus $1,200+ for a full residential system. Replacement only wins when the operator motor is failing or the system can’t support the features you need.
Can you install a keypad or telephone entry system on my existing gate?
Yes. In many cases we build access control around your working operator for $1,200 to $2,800, as long as the operator and gate are in good condition. We’ll confirm that during your free estimate.
How much does a commercial or HOA gate system cost in Chino?
Commercial and HOA systems usually start around $6,000 and can exceed $20,000 for multi-building properties with several readers and heavy-duty operators. Call (866) 304-1321 and we’ll scope it for your property.
Can you service my specific gate access brand in Chino?
Yes. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Brand familiarity means we read the error codes and source the right parts instead of guessing. Call (866) 304-1321.
Get a Free Estimate on Gate Access Control in Chino
Prices vary with your gate, your operator, and how many entry points you want to control – but the range starts at about $1,200 for a residential system and climbs from there. We’ll walk your property, tell you what’s working, and price the job in plain terms, no upsell. Call (866) 304-1321 for a free estimate on gate access control in Chino. Start with our home page to see the full scope of what we do.
Pricing reflects the Chino market as of 2026. Lexington Gate Repair offers free estimates – call (866) 304-1321.
What Our Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Priya Rao"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Ruben Ramirez"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Danika Jackson