Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Muscoy, CA | Lexington Gate Repair
We repair Ghost Controls gate openers across Muscoy, and we’ve handled enough of them here to know what’s actually going wrong before we pull into the driveway. If your Ghost Controls swing or slide operator is faulting, stalling, or dead altogether, call us at (866) 304-1321 and we’ll diagnose it. In Muscoy specifically, most “motor failures” are really a post that’s tipped out of plumb in the sandy soil, and the opener is fighting a gate that no longer swings true.
We’re an independent Ghost Controls service provider. No dealership, no manufacturer affiliation. Just hands-on time with these operators on actual Muscoy driveways. Our Ghost Controls sales & service work spans the full operator line, and when you call from Muscoy, you’re talking to someone who knows what your gate is doing to itself out there.
Why Muscoy Residents Choose Us for Ghost Controls Service
We work on Ghost Controls equipment every week, and the failure patterns that show up repeatedly on Muscoy driveways are things we’ve already catalogued in our heads. Heat-damaged control boards, drifted limit switches, dead backup batteries, actuators straining against a gate that’s sagging because the post underneath it moved half an inch. None of it surprises us anymore.
Nelson Arquette, our owner, spent years in the Electrical and Industrial Technology program at Chaffey College in Rancho Cucamonga, where troubleshooting was the entire curriculum. He’s been working on gate systems across the Inland Empire for the better part of three decades, from Ghost Controls repair in Rialto to communities throughout the region. That’s why he can often tell a customer what’s wrong over the phone before we ever dispatch a truck. As Nelson puts it, “If I can tell you what’s wrong before I touch it, we’re already halfway done.”
For Muscoy homeowners, that matters. You don’t want a general handyman cracking open a Ghost Controls control box and learning on the job while your gate sits half-open. We’re a gate specialist, not a generalist. Our Muscoy service area coverage means we’re already familiar with what your equipment is up against out here.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Muscoy
These are the issues we see most on Ghost Controls operators in Muscoy, tied directly to what this area’s climate and soil do to gate hardware.
- Control-board faults after summer heat. Muscoy summers are hot and dry, with long stretches of triple-digit sun beating on exposed control boxes. Dust from unpaved driveways and dirt roads gets pulled into enclosures. We regularly find blown fuses and scorched terminals on Ghost Controls boards that sat through a full season of direct exposure. We replace with genuine Ghost Controls boards where the unit is serviceable and seal the enclosure properly so it doesn’t recur within a year.
- Limit-switch and arm-actuator drift from shifting posts. Muscoy ground is sandy and it shifts. A post with no concrete footing or a shallow pour will tilt, and suddenly the Ghost Controls arm is pushing a gate that’s dragging or binding on the lower hinge. The operator registers a fault and stops mid-travel. We re-set the post, plane or shim the gate, and re-teach the travel limits so the opener isn’t fighting geometry.
- Battery-backup and solar-charge failures on exposed driveways. Ghost Controls battery systems work, but not when the panel is caked with San Bernardino County dust and the battery’s been baking in an unshaded box for four years. We test charge capacity, clean or replace solar panels, and swap tired batteries before they take out the control board with them.
- Operator overload from warped wood gates. Santa Ana winds dry out and warp wood-frame gates on older Muscoy properties. The Ghost Controls opener reads the added resistance as a motor problem and faults. Sometimes the fix is realigning hinges and trimming the gate; sometimes the frame is too far gone and we tell the homeowner straight before throwing parts at it.
- Rusted hinge hardware that binds the operator. Decades-old metal gates in Muscoy often have original hinges that have seized or rusted through. The Ghost Controls opener has enough torque to power through some of it, but eventually the strain burns out the arm or trips the thermal protection. We replace hinges and realign before re-commissioning the operator.
Ghost Controls Service in Muscoy: What Local Conditions Mean for Your Equipment
Here’s the thing about Muscoy that changes how Ghost Controls repairs play out here. This is unincorporated San Bernardino County. That means property-line gate work falls under county right-of-way and fencing rules, not a city permit desk. A disabled opener that’s keeping a gate stuck open or closed doesn’t require a permit to repair or re-set, and most adjustments to existing poles and operators on your own property line move forward without county sign-off because you’re not changing the fence line or replacing the structure. But the bigger local factor is what we find underneath the posts.
Drive down almost any road in Muscoy’s 92405 and you’ll see swing gates set directly into sandy, shifting soil with little or no concrete. Some were built that way forty years ago. Others had a skim coat of cement that’s since cracked and spalled away. When that post tips, the Ghost Controls unit is now pushing a gate that’s dragging, and the result is limit faults, thermal trips, or a control board that eventually gives up. We’ve re-set and braced more posts in Muscoy than we have in a lot of neighboring cities — including our Bloomington Ghost Controls service area — because the soil here specifically doesn’t hold a freestanding post the way compacted loam does. A Ghost Controls opener that “fails” out here is often fine. It’s the ground underneath that moved.
We saw this on a large-lot property off the sandy stretch near Muscoy. A homeowner’s Ghost Controls Heavy-Duty single-swing operator kept tripping its limit fault and stalling halfway open. Our tech found the driveway post had shifted in the loose soil and the gate was dragging. We re-set and braced the post, realigned the arm and limits, and swapped the tired backup battery. The gate now runs full travel without faulting, and we left the owner a note to check post plumb each season.
Ghost Controls Models & Products We Service in Muscoy
We service the full Ghost Controls residential operator line, including the Heavy-Duty Single Swing Gate Opener (AXS1 and AXTB kit families), the Dual Swing Gate Opener (AXDP dual-arm kits), and the Slide Gate Operator (TSS1 slide kit family). We also work on the solar and battery-backup accessory kits that Ghost Controls pairs with these operators, which matters a lot on Muscoy properties where running conduit to the gate isn’t practical.
On the parts side, we use genuine Ghost Controls replacement boards, arms, limit switches, and batteries wherever the operator is serviceable. For the gate hardware itself, we’re not married to a factory label. Quality aftermarket hinges, brackets, and posts often outlast what was originally installed, especially in sandy soil. When a unit is weathered to the point where the board, actuators, and battery all need replacement, we tell the homeowner plainly when a new operator is a smarter spend than chasing parts.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Muscoy
Service calls to Muscoy run on straightforward diagnostics first. A typical repair visit lands between $150 and $320, and that covers travel, hands-on diagnosis, and most minor adjustments like limit re-teach or hinge realignment on a smaller swing gate. Parts are quoted separately before any work proceeds, so you know the full number before we turn a wrench.
Where the job sits depends on the operator and the gate’s condition. Replacing a control board on a Ghost Controls Heavy-Duty single-swing typically runs $260 to $520 including the board and labor. An arm-actuator replacement on a dual-swing setup usually lands between $220 and $480 per arm. Battery-backup swaps, including testing the charge system, run $180 to $420 depending on whether we’re also cleaning or replacing a solar panel. Full operator replacements for older Ghost Controls units that aren’t worth parting out run $900 to $2,200 installed, depending on single versus dual swing, slide versus swing, and how much post work the site needs. Every quote is written and agreed before work starts. Call (866) 304-1321 for a free estimate, and we’ll give you the real number.
Serving Muscoy, CA — Our Local Coverage Area
We’re based in the Muscoy area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Muscoy
In our experience on Muscoy driveways, the leading cause is a post that’s drifted out of plumb in the sandy soil and the gate is binding enough to trip the operator’s limit or thermal protection. We check post plumb and gate travel before assuming the opener is at fault. Call us at (866) 304-1321 and we’ll sort out whether it’s the opener or the ground under it.
For repairing or replacing the operator, re-setting an existing post, or realigning hardware on your property line, no county permit is needed because you’re not changing the fence line or adding a new structure. If you’re installing a new gate and moving or extending the fenced boundary, that’s a different conversation, and we can walk you through what San Bernardino County expects. Repairs and adjustments are our daily work out here.
The hot, dry Muscoy summer is hard on electronics, and the heat plus dust intrusion into the control box is the usual culprit. Heat expands and stress-tests solder joints and terminals, and dust from unpaved shoulders gets into everything. We inspect for heat-affected components and reseal the enclosure so the next summer doesn’t cook it again. Estimates are free at (866) 304-1321.
Yes, with maintenance. The two things that kill solar setups out here are dust fouled panels and batteries that bake in unshaded enclosures. We clean panels, test charge capacity, and replace batteries before they take the control board down with them. A properly maintained Ghost Controls solar and battery kit will hold up fine on a fully exposed Muscoy driveway.
Yes. We’re certified service on nine gate opener brands including Ghost Controls, LiftMaster, and Mighty Mule, plus FAAC, BFT, Linear, Viking, DoorKing, and Elite. If you have a Ghost Controls opener on the driveway and a Mighty Mule on the back gate, one visit covers both. Call (866) 304-1321 and we’ll schedule them together.
Service Areas Near Muscoy
We run service calls throughout the surrounding San Bernardino County communities. If your Ghost Controls opener is down, we’re also out in Ghost Controls service in Foothill Ranch, Ghost Controls service in Chino, plus Los Serranos, Ontario, Montclair, Pomona, and Claremont. If you’re in Muscoy or just outside it, call and we’ll get you scheduled.
Book Your Ghost Controls Service in Muscoy Today
If your Ghost Controls gate is down, faulting, or making a noise it didn’t make last month, call (866) 304-1321 now. We’ll diagnose it over the phone, give you a straight answer, and get a tech out to your Muscoy property. Free estimates, same-day service when the schedule allows, and every quote written and agreed before we start.
Written by Nelson Arquette, Owner at Lexington Gate Repair, serving Muscoy and the Inland Empire for nearly three decades.