Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Jurupa Valley, CA
Gate installation in Jurupa Valley means working with wide, heavy gates on long driveways, often built for RVs or horse trailers on semi-rural lots. The dry heat, Santa Ana winds, and sandy soil in parts of Mira Loma put real stress on posts, hinges, and opener hardware, so the work has to be done right the first time. Lexington Gate Repair has served Jurupa Valley since 2011, and we handle the full range from automatic gate systems to heavy-duty sliding gates. Call (866) 304-1321 for a free estimate.
Why Jurupa Valley Homes Are Different
Jurupa Valley’s housing stock leans heavily toward single-family homes on large lots, many with RV access, horse properties, and custom or manufactured homes. That translates to a high number of wide driveway gates rather than narrow pedestrian gates you would see in a typical subdivision. A standard 12-foot gate is common here, but we regularly work on 16- and 20-foot spans that have to clear horse trailers and motorhomes.
The climate is the other factor. Jurupa Valley summers run hot and dry, and the Santa Ana winds that sweep through in the fall can carry enough dust to foul gate hinges and opener tracks within a season. Wood gates warp and crack in the low humidity. Metal gates develop surface rust where the powder coating gets scratched by wind-blown grit. Then the occasional winter rain softens the sandy soil that many Mira Loma properties are built on, and gate posts that were set straight start to lean. A gate that scrapes the ground after a rain is one of the most common repair calls we get in the 91752 zip code. Installations here need deeper post footings, heavier hardware, and openers rated for gates that catch wind like a sail.
Styles & brands we work with
Our Main Jurupa Valley Services
Most homeowners in Jurupa Valley call us for one of two reasons: a gate that has stopped moving or a gate that has stopped opening and closing on its own. Both are covered by the two service pages below.
Gate Repair in Jurupa Valley
A dragging gate, a sagging hinge, a latch that no longer lines up – these are the mechanical failures we see most often in Jurupa Valley, and they usually trace back to shifting sandy soil or wind-driven dust. We fix the gate itself: hinges, rollers, posts, latches, wheels, and track alignment. On properties in Mira Loma with gravel driveways, posts set without deep enough footings lean after a heavy rain, and the gate starts binding. We reset or reinforce the post, replace worn hardware, and get the gate swinging cleanly again. Read more on our Gate Repair in Jurupa Valley page.
Electric Gate Repair in Jurupa Valley
When the opener hums but the gate doesn’t move, or the keypad stops responding, or the safety sensors keep tripping for no reason, that’s an electric gate problem. In Jurupa Valley, dust intrusion into control boards and limit switches is a frequent culprit, especially during Santa Ana season. We diagnose and repair openers from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we don’t guess. See our Electric Gate Repair in Jurupa Valley page for full details.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Jurupa Valley
Gate installation in Jurupa Valley is rarely a bolt-and-go job. The lots are wide, the gates are heavy, and the soil in areas like Mira Loma can be sandy and unstable after rain, so post footings have to be deeper than what a standard installation would require in a neighboring city. A new gate here also has to stand up to Santa Ana winds that can push a wide gate hard against its opener. We install gates that are built for these conditions, and because we’re a gate specialist, not a general fencing company that also does gates, the work is done by technicians who do this every day. If you’re considering a full Gate Installation, we handle everything from the first measurement to the final opener programming.
Automatic Gate Installation
Signs you need it
Your current gate swings or slides manually, and you’re tired of getting out of the car to open and close it every time you leave or come home.
What it costs in Jurupa Valley
Automatic gate installation in Jurupa Valley typically runs $2,800 to $9,700, depending on gate size, opener type, and whether power needs to be run to the gate location.
How we do it
We measure the gate and driveway, confirm the swing or slide direction, set or reinforce posts, mount the opener and arm, run low-voltage control wiring, install the keypad and safety sensors, and program the travel limits so the gate opens and closes fully without strain.
Driveway Gate Installation
Signs you need it
You have a wide driveway with RV access or a horse property, and you need a gate that actually spans the opening and holds up to heavy daily use.
What it costs in Jurupa Valley
Driveway gate installation in Jurupa Valley typically runs $3,500 to $12,000 for a wide, heavy-duty gate with posts and hardware built for the local wind and soil conditions.
How we do it
We survey the driveway width and grade, order or fabricate a gate rated for the span, dig and pour footings deep enough for Jurupa Valley’s sandy soil, set the posts, hang the gate, and test it through dozens of open and close cycles before we call the job done.
Sliding Gate Installation
Signs you need it
Your driveway slopes or your opening is too wide for a swing gate, and you want a gate that slides along the fence line instead of arcing into the driveway.
What it costs in Jurupa Valley
Sliding gate installation in Jurupa Valley typically runs $3,800 to $13,500, with the higher end reserved for cantilever gates on long commercial or equestrian openings.
How we do it
We set a reinforced post or steel frame at the receiving end, pour a concrete track or mount rollers for a cantilever design, hang the gate, install the opener and safety edges, and adjust the travel so the gate stops softly at both ends.
What Gate Installation Costs in Jurupa Valley
| Item | Typical range in Jurupa Valley |
|---|---|
| Automatic gate opener (swing) | $2,800 – $9,700 |
| Wide driveway gate with posts | $3,500 – $12,000 |
| Sliding gate (track or cantilever) | $3,800 – $13,500 |
Can you install a gate on a gravel driveway in Jurupa Valley?
Yes. We install gates on gravel driveways regularly, especially in the Mira Loma area. The key is setting posts in concrete footings deep enough to stay stable in sandy soil, and we account for that in both the design and the quote.
Do I need a permit for a new gate in Jurupa Valley?
Most residential gate installations in Jurupa Valley do not require a permit, but if the gate includes an automatic opener or is on a commercial property, city building codes may apply. We can tell you what your specific project needs during the estimate.
Brands We Service in Jurupa Valley
We work on gate openers from FAAC, BFT, Linear, and Viking, among other major manufacturers. That brand-specific knowledge means we can pull the right part, read the error codes correctly, and avoid the misdiagnosis that happens when a generalist treats every opener the same. More detail on our our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Jurupa Valley, CA
| Service | Typical range in Jurupa Valley |
|---|---|
| Gate opener repair (electric) | $225 – $650 |
| Track repair or replacement | $475 – $1,575 |
| Gate wheel or roller replacement | $350 – $1,150 |
| Keypad or safety sensor replacement | $225 – $795 |
| Gate post reset or reinforcement | $650 – $1,450 |
| Automatic gate installation | $2,800 – $9,700 |
| Driveway gate installation | $3,500 – $12,000 |
| Sliding gate installation | $3,800 – $13,500 |
| Full gate replacement (repair outcome) | $2,300 – $8,000 |
What pushes a price up in Jurupa Valley is usually the gate width and the soil. A 20-foot gate on a sandy Mira Loma lot needs a bigger post and a deeper footing than a 10-foot gate on compacted ground, and wind-rated openers for wide gates cost more than basic residential units. Whatever the number, we quote it before any work starts, and the price you approve is the price you pay.
Neighborhoods We Serve in Jurupa Valley
We cover all of Jurupa Valley’s 91752 zip code, from the equestrian properties of Mira Loma to the residential pockets along Limonite Avenue and the hillside streets off Sierra Avenue. Response time across the area is typically same-day or next-day for repairs.
- Mira Loma
- Pedley
- Sunnyslope
- Glen Avon
Service Area – Cities Near Jurupa Valley
While we focus heavily on Jurupa Valley, we also take gate repair and installation calls in the neighboring communities. If you’re in Glen Avon, CA, Pedley, CA, Sunnyslope, CA, or Eastvale, CA, the same gate-specialist service applies.
Serving Jurupa Valley, CA — Our Local Coverage Area
We’re based in the Jurupa Valley area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Jurupa Valley
For gate repairs, we typically schedule same-day or next-day service across Jurupa Valley, including Mira Loma, Pedley, and Sunnyslope. New installations are scheduled after a free on-site measurement and can usually be booked within one to two weeks.
Yes. We service commercial and HOA gate systems throughout Jurupa Valley, including openers from FAAC, BFT, and DoorKing that are common on community entrances. We work with property managers on access control repairs, safety sensor replacement, and full gate overhauls.
We always give you a firm price before any work begins. For repair jobs, the diagnostic is part of the visit, and once we identify the problem we show you the cost and get your approval before turning a wrench. For installations, the written estimate covers the gate, hardware, opener, and labor with no surprise line items.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Jurupa Valley Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Marco Garcia"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Veronica Martinez"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Nathan Novak