Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Bloomington, CA
Gate installation in Bloomington usually means working with older homes on wide lots, where driveway gates and perimeter fencing have been in place for decades. The hot, dry Inland Empire climate and sandy, shifting soil create specific problems: posts lean, rollers bind, and hardware corrodes faster than it does closer to the coast. If your gate won’t open, sags on its hinges, or your opener struggles against a gate that’s out of alignment, call Lexington Gate Repair at (866) 304-1321 for a straight answer and a fixed price before any work starts.
Why Bloomington Homes Are Different
Bloomington sits squarely in the Inland Empire’s hot, dry corridor east of Fontana and Rialto. Summer sun here is intense, and the dusty Santa Ana winds accelerate rust on iron and galvanized steel. That means a gate installed 20 years ago has been through roughly 20 cycles of extreme UV exposure, wind-driven grit, and winter rain soaking into every seam. Chain-link fabric stretches, ornamental iron develops rust blooms at the welds, and swing gates start scraping the ground as hinges wear. None of this is cosmetic; it’s mechanical wear that compounds until the gate stops moving altogether.
The bigger factor is the ground itself. Bloomington’s sandy, expansive soils move with moisture and temperature, and field-poured posts that looked plumb in 1985 are now leaned two or three inches out of square. We regularly correct post lean before we touch rollers or hinges, because no amount of hardware adjustment fixes a gate hanging on a tilted post. Many of the gates we service here were field-fabricated by local welders rather than ordered from a catalog, so replacement parts often need to be cut, drilled, or welded to fit. That’s not a problem for a gate specialist; it’s the job. But it’s exactly why a general handyman or fencing crew tends to struggle with Bloomington gate work.
Styles & brands we work with
Our Main Bloomington Services
Most calls we take in Bloomington fall into two categories: mechanical gate repair for gates that have physically failed, and electric gate repair for openers and access systems that have stopped responding. Both are covered below.
Gate Repair in Bloomington
Gate repair in Bloomington typically involves worn hinges on swing gates, seized rollers on sliding gates, and posts that have settled out of alignment. Many of these gates are custom-built chain-link or ornamental iron structures that have been retrofitted over the years with mismatched hardware. We cut out the worn sections, fabricate what’s needed, re-level the hinge posts, and get the gate swinging or sliding cleanly again. For details on mechanical failures, sagging gates, and roller replacement, see our Gate Repair in Bloomington page.
Electric Gate Repair in Bloomington
Electric gate repair in Bloomington means diagnosing opener failures, control board faults, photo-eye misalignment, and limit switch problems on automatic gates. The heat and dust here push circuit boards and battery backups hard, and Santa Ana wind events can bend gate frames enough to knock limit settings out of range. We service LiftMaster, DoorKing, Elite, FAAC, BFT, Linear, Viking, Ghost Controls, and Mighty Mule systems, so we read the error codes in the brand’s own language. Full details are on our Electric Gate Repair in Bloomington page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Bloomington
Gate installation in Bloomington usually means replacing a gate that has reached the end of its service life, or adding an automatic opener to an existing manual gate. The housing stock here runs to mid-century and older single-family homes on generous lots with long driveway approaches, and many of those gates were built on site decades ago. Between the corrosive effects of Bloomington’s heat, dust, and winter moisture, and the uneven settling of sandy soils, a gate that was fabricated in the 1980s is often no longer worth patching. We handle the full replacement, from measuring the opening to setting posts in concrete to hanging and adjusting the new gate, and we can integrate an opener at the same time. If you’re weighing repair against replacement, this is the page to read, and you can also see our full service breakdown on the Gate Installation page.
Automatic Gate Installation
Signs you need it
You have a manual gate that you’re tired of opening by hand, or your existing opener is so old that replacement parts are no longer manufactured.
What it costs in Bloomington
Full automatic gate installation in Bloomington typically runs from $2,500 to $9,000 depending on the gate size, opener type, and whether new conduit and power must be run to the post.
How we do it
We mount the operator, run the required low-voltage and power lines, install the safety photo-eyes and edge sensors, set the open and close limits, and program your remotes and keypad.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is racked, rusted through at the bottom rail, or so far out of square that it no longer latches or tracks correctly.
What it costs in Bloomington
A new driveway gate installation in Bloomington generally falls between $2,500 and $6,500 for a fabricated steel or aluminum gate sized to a standard residential driveway opening.
How we do it
We measure the actual opening rather than trusting the old gate’s dimensions, cut and weld or assemble the new gate, set or straighten the posts, and hang the gate with an allowance for Bloomington’s shifting soil.
Sliding Gate Installation
Signs you need it
Your sliding gate has been welded and re-welded too many times to count, or the track is so worn and pitted in sections that the gate jerks and stalls.
What it costs in Bloomington
Sliding gate installation in Bloomington starts around $2,500 and can reach $9,000 for a heavier commercial-style gate with a rack-and-pinion drive and full automation.
How we do it
We set the track on a leveled base, install the rollers and guide posts, hang the gate, and adjust the end stops so the gate opens and closes smoothly over Bloomington’s soil conditions.
What Gate Installation Costs in Bloomington
| Item | Typical range in Bloomington |
|---|---|
| Driveway gate installation | $2,500 – $6,500 |
| Automatic gate installation (gate and opener) | $2,500 – $9,000 |
| Sliding gate installation | $2,500 – $9,000 |
Do I need a permit to install a gate in Bloomington?
Most standard residential driveway gate installations in Bloomington don’t require a permit, but if your gate has an automatic opener or sits on a commercial property, county requirements may apply. We’ll tell you during the estimate whether your job needs paperwork, and we quote the price before any work starts.
How long does a gate installation take in Bloomington?
Most residential gate installations in Bloomington take one to two days once materials are on site, though field-fabricated iron gates can take a few extra days for welding and finishing. We schedule the work and give you a written price before we begin, not after.
Brands We Service in Bloomington
We service openers and operators from DoorKing, Elite, LiftMaster, and Mighty Mule, among others, and we keep the most common replacement parts for these brands stocked locally so a repair doesn’t stall waiting on a shipped component. Brand-specific diagnostics mean we can often pinpoint the fault in a single visit, then fix it with the correct part the first time. See our brands for the full list of what we work on.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Bloomington, CA
| Service | Typical range in Bloomington |
|---|---|
| Gate repair (per service call) | $85 – $150 |
| Basic gate repair (labor only) | $150 – $300 |
| Gate hinge replacement | $200 – $350 |
| Gate wheel/roller replacement | $200 – $350 |
| Automatic gate opener installation | $500 – $1,000 |
| Electric gate repair (per call) | $85 – $150 |
| Opener repair | $150 – $300 |
| Sensor/photo-eye adjustment | $100 – $200 |
| Driveway gate installation | $2,500 – $6,500 |
| Automatic gate installation (full) | $2,500 – $9,000 |
| Sliding gate installation | $2,500 – $9,000 |
| Gate opener replacement | $500 – $1,500 |
The biggest price drivers in Bloomington are post condition and soil movement. A gate that needs new posts set in concrete, or a hinge post that has to be cut out and re-set due to lean, adds labor and materials to any repair. You’ll get a firm, itemized quote before work begins, and that’s the price you pay unless we find something structural and get your approval in writing first.
Neighborhoods We Serve in Bloomington
Lexington Gate Repair works throughout the 92316 ZIP code and the surrounding Bloomington area. Most of our service calls take us to the older single-family neighborhoods south of Valley Boulevard, the larger acreage parcels along the city’s eastern edge, and the mixed residential streets near Cedar Avenue and Slover Avenue.
- South Bloomington neighborhoods off Valley Boulevard
- East Bloomington acreage and long-driveway properties
- Streets near Cedar Avenue and Bloomington High School
- Properties along Slover Avenue and the surrounding blocks
- West Bloomington, bordering Fontana
Typical response time for gate repair in Bloomington is same day or next day, depending on when you call and how many jobs are already scheduled.
Service Area – Cities Near Bloomington
We also handle gate repair, electric gate repair, and gate installation for homeowners in the neighboring communities. If you’re in Fontana, CA, Rialto, CA, Glen Avon, CA, or Pedley, CA, we can schedule a service call for your gate or opener. The same specialist team covers all of these areas, so you’re getting a dedicated gate technician, not a general contractor squeezing in a gate job between fences.
Serving Bloomington, CA — Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Bloomington
Most Bloomington gate repair calls are completed same day or next day. If your gate is stuck open or won’t close, tell us when you call and we’ll prioritize it, because an open gate at night is a security problem that shouldn’t wait.
Bloomington has fewer HOA-controlled enclosures than nearby Fontana or Rialto, so most single-family gate work here doesn’t face architectural review. Automatic gates on commercial properties can trigger county permitting requirements, and we’ll let you know during the estimate if that applies to your job.
Yes, and that’s one of the main reasons Bloomington homeowners call us. When a repair turns into a replacement, or you want to add an automatic opener to an existing manual gate, we handle the entire job so there’s no handoff between a welding shop and an electrician. Call (866) 304-1321 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bloomington Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Veronica Martinez"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Nathan Novak"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Norma Rodriguez