Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Orange, CA
Gate installation in Orange, CA most often means matching a new automatic gate to a 1920s Craftsman or a 1965 tract home, and the right answer changes a lot between those two. We focus on gate installation, gate repair, and electric gate repair, which means the technician who measures your driveway is the same one who knows how a FAAC board behaves in a Santa Ana heat wave. Call us at (866) 304-1321 for a free estimate on any gate job in Orange.
Why Orange Homes Are Different
Orange packs two very different housing eras into one city, and each one fails in its own way. The Old Towne district around the Plaza holds hundreds of pre-1930 homes with original wood picket gates, wrought-iron drive gates, and decorative scrollwork that the city’s historic design review protects. When a cast-iron hinge cracks on a 1926 Spanish Colonial Revival on Maple or Shaffer, the repair has to match the original profile, not swap in whatever fits. That means we keep a welder and a millwork shop on call for Orange jobs, because a gate on a protected street is a preservation project, not just a repair. The east side of Orange, by contrast, runs to 1960s and 1970s tract homes with steel tube gates and cinder-block front walls. Those gates fail differently, sagging at the hinge post and grinding opener tracks. And every fall, the hot dry Santa Ana winds shrink the wood gates in Old Towne, then winter rain swells them again. Around the Orange Plaza, we see more sticking and binding issues in October and November than any other time of year. That cycle is predictable, which is why we adjust for it when we install or repair anything in the 92863, 92864, 92865, and 92866 ZIP codes.
Styles & brands we work with
Our Main Orange Services
These are the two services Orange homeowners and property managers call us about most often, each with its own dedicated page.
Gate Repair in Orange
Most gate repairs in Orange start with a gate that will not open, will not close, or sits crooked because the post shifted. In Old Towne, we regularly repair original wood gates that have pulled away from their hinges after a dry season, then swollen tight against the latch after rain. On newer east-side homes, the problem is more often a bent steel frame or a broken wheel on a sliding gate. We carry common hardware in the truck, so many Orange repairs get done on the first visit, not after a parts order. When you need a full picture, see our Gate Repair in Orange page for what a typical repair includes.
Electric Gate Repair in Orange
An electric gate that opens halfway, beeps without moving, or trips its breaker is a controls problem, not a steel problem. In Orange, automatic openers take a beating from fall Santa Ana dust getting into circuit boards and limit switches. We diagnose system-specific error codes on FAAC, BFT, Linear, and Viking openers, and we get to the faulty component without replacing parts that do not need replacing. For a deeper look at what the work involves here, read our Electric Gate Repair in Orange page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Orange
New gate installation in Orange starts with the driveway itself. Old Towne homes with narrow, short approaches need a gate scaled to the period look, often a swing gate that preserves the original pilaster and fence line. East-side tract homes on wider lots take a sliding gate well, and those properties are where we install the most automatic openers, because the gate runs on a steel rail instead of swinging into cars or landscaping. Climate works against a bad install here: a swing gate hung without accounting for seasonal wood movement in Old Towne will bind by Thanksgiving. A sliding gate set on a low spot in an east Orange driveway will drag every winter. We measure, quote, and build around those conditions. For the full scope of what we install, visit our Gate Installation page.
Automatic Gate Installation
Signs you need it
You are getting out of the car to open the gate every time, or the gate is heavy enough that a manual pull feels like a shoulder injury waiting to happen.
What it costs in Orange
Automatic gate installation in Orange typically runs $4,500 to $12,000 installed, with the opener and controls making up a significant share of the job on a custom gate.
How we do it
We survey the driveway width, slope, and setback, confirm the right opener for the gate weight, then build the gate and opener as one system so the motor never fights the structure.
Driveway Gate Installation
Signs you need it
The existing gate sags and scrapes the driveway, or you need security and privacy for a front or side entry that has never had a real gate.
What it costs in Orange
A driveway gate installation in Orange generally lands between $3,500 and $11,000 depending on materials, with custom wrought-iron work on Old Towne properties pushing toward the upper end.
How we do it
We set posts in concrete to the depth the soil and gate weight demand, hang the gate with adjustable hinges, and on automatic jobs run the conduit, wire, and safety edges before the opener is mounted.
What Gate Installation Costs in Orange
| Item | Typical range in Orange |
|---|---|
| Automatic gate installation (full system) | $4,500 – $12,000 |
| Driveway gate installation | $3,500 – $11,000 |
| Gate opener installation (labor) | $350 – $900 |
Do I need a permit to install a gate in Orange?
Most residential gate installations on existing driveways move forward without a permit, but Old Towne properties under historic design review usually need approval before any gate visible from the street changes profile or material. We identify that requirement during the estimate so you are not surprised later.
How long does a gate installation take in Orange?
A standard driveway gate installation takes one to two days on site, with custom wrought-iron or wood gates adding fabrication time before we ever arrive. We confirm the schedule and the full price before any work starts, so there is no open-ended wait.
Brands We Service in Orange
We service FAAC, BFT, Linear, and Viking openers in Orange, along with LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule. Common control boards, receivers, and arms for those brands are stocked in our Chino shop, so most Orange repairs do not wait on a shipped part. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Orange, CA
| Service | Typical range in Orange |
|---|---|
| Gate repair (minor, e.g., hinge or latch) | $150 – $400 |
| Gate repair (moderate, e.g., wheel or track) | $225 – $700 |
| Gate repair (major frame or structural) | $500 – $1,200+ |
| Electric gate repair (diagnostic) | $100 – $250 |
| Electric gate repair (control board replacement) | $350 – $900 |
| Electric gate repair (actuator/arm replacement) | $500 – $1,500 |
| Gate opener installation (labor) | $350 – $900 |
| Driveway gate installation | $3,500 – $11,000 |
| Automatic gate installation (full system) | $4,500 – $12,000 |
In Orange, the two big price movers are age and architecture. A wrought-iron gate on a 1920s Old Towne property costs more to repair because the parts have to be matched or fabricated, not bought off a shelf. A 1970s tube gate usually costs less because the material is standard. The final number on any job is quoted and agreed before we start, so you will never get an invoice that looks like a second surprise.
Neighborhoods We Serve in Orange
We run gate repair and installation calls across Orange, from the historic blocks around the Plaza to the tract neighborhoods east of the 55. Typical response for a repair call in Orange is same day or next morning, depending on call volume.
- Old Towne Orange
- East Orange
- Orange Park Acres
- Presidential Streets
- Santiago Hills
Service Area – Cities Near Orange
Our service area runs from Orange into the surrounding cities, so if you are in Villa Park, CA, North Tustin, CA, or Tustin, CA, the same gate technicians cover your street. We also serve Anaheim, CA for both residential driveways and commercial access control work.
Serving Orange, CA — Our Local Coverage Area
We’re based in the Orange area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Orange
Most Orange repair calls get a same-day or next-morning visit. If the gate is stuck open or stuck closed, we treat it as a priority and tell you the estimated arrival window when you call.
Yes. We service automatic gate systems on apartment complexes, HOAs, and commercial properties throughout Orange, including FAAC, BFT, Linear, and Viking controls common in those settings.
Yes. For original wrought-iron and wood gates in Old Towne, we coordinate with a welder and a millwork shop to repair profiles and hardware so the result matches the original design, which is what the historic review process expects.
If your gate is down, stuck, or scheduled for replacement in Orange, call (866) 304-1321 for a free estimate. We will give you the price before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Orange Customers Say
"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Rosa Morales"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Priya Rao"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Ruben Ramirez