Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Rialto, CA
Gate installation in Rialto is a different animal than what you’d find closer to the coast or up in the mountains. Most of the homes across the 92376 and 92377 ZIP codes were built between the 1960s and early 2000s, on generous suburban lots with block walls and wrought iron driveway gates. What that means for us: we’re usually working with original steel posts sunk decades ago, gates that have been slammed by canyon winds for years, and property owners who need a gate that actually closes square and stays that way. Lexington Gate Repair specializes in gate installation, repair, and electric gate repair – nothing else. If you’re dealing with a gate that’s sagging, dragging, or won’t stay latched, call us at (866) 304-1321.
Why Rialto Homes Are Different
Rialto sits right at the base of the Cajon Pass, and that geography shapes every gate job we take here. The Santa Ana and canyon winds funnel west-to-east through the valley with enough force to knock gates out of plumb, bend top hinges, and strip latch hardware on the exposed side of a yard. We see this pattern constantly: gates along the west-facing property line take the worst beating, getting blown open or slammed shut during wind events. The fix isn’t just straightening the gate leaf – it’s re-hanging with wind-rated hinges and reinforcing the frame so the same thing doesn’t happen again next season.
The housing stock matters too. Much of Rialto is post-WWII and 1960s-to-2000s single-family tract development. Block walls and wrought iron driveway gates are standard, especially on the larger lots throughout 92376 and 92377. Many of these original gate posts were set directly into concrete without sleeves or proper footings. Combine that with decades of triple-digit summer heat expanding the steel and wind stressing the hinge points, and you get gates that sag, bind at the latch, or refuse to close after a few years. Newer industrial and warehouse perimeter gates near the I-210 and I-15 corridors have their own set of demands – heavier panels, longer slide runs, and higher cycle counts.
The dry climate actually helps in one way: we don’t deal with the rust-through and wood rot that coastal cities battle. But UV and heat take a real toll on powder coating, paint, and anything plastic in the operator housing. And the wind? That’s the constant. On any wind-event day, we’re out re-hanging gates that got blown off their tracks or off their hinges entirely.
Styles & brands we work with
Our Main Rialto Services
Most calls we take in Rialto fall into two buckets: a gate that’s physically broken or out of alignment, and an electric opener that’s stopped working. Both are covered, and both start with the same phone call.
Gate Repair in Rialto
Rialto gates take a structural beating from wind and heat that most other cities never see. We straighten bent frames, weld cracked hinge points, replace stripped latches, and re-set posts that have shifted out of plumb. On older tract homes, the original posts are frequently rusted at the base or set too shallow, which means the repair has to address the foundation, not just the gate leaf. Our technicians carry wind-rated hinge hardware and steel reinforcements specifically because this city demands it. If your gate drags across the driveway or won’t hold a latch, read the full breakdown on our Gate Repair in Rialto page.
Electric Gate Repair in Rialto
Automatic gate openers in Rialto deal with two local enemies: extreme heat baking the control board and wind constantly pushing against the motor while the gate is trying to open or close. We diagnose and repair openers from FAAC, BFT, Linear, and Viking, plus the other major brands we service. That means pulling the error codes correctly, sourcing the right replacement part instead of guessing, and re-setting limit switches so the gate doesn’t stall out mid-cycle when the wind kicks up. For a full look at how we handle opener failures, see Electric Gate Repair in Rialto.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Rialto
New gate installation in Rialto usually means one of two situations: replacing an old gate that’s finally bent beyond repair, or adding an automatic gate to a property that’s never had one. The Rialto-specific problem we solve on nearly every install is wind survival. We set posts deeper than the original builder did, reinforce the frame with gussets and cross-bracing, and select hardware rated for the kind of sustained gusts this corridor delivers. A gate installed correctly for Rialto conditions will stay square for decades, not months. Our full Gate Installation service covers everything from a single residential driveway gate to a commercial perimeter system.
Automatic Gate Installation
Signs you need it
You’re getting out of the car to open and close a manual gate daily, or you want controlled access to a driveway or yard without upgrading your entire fence.
What it costs in Rialto
Automatic gate installation in Rialto typically runs $2,500 to $7,500 depending on gate size, opener type, and whether power needs to be run to the gate location.
How we do it
We survey the driveway or entry point, set wind-rated posts, mount the gate and opener, run the necessary power and safety components, and program the system to your openers and keypad.
Driveway Gate Installation
Signs you need it
Your current driveway gate sags enough to drag, the hinge posts lean visibly, or you’ve never had a gate and want to secure the front of the property.
What it costs in Rialto
Driveway gate installation in Rialto typically ranges from $1,800 to $5,500 for a standard single or double swing gate with new posts and hardware.
How we do it
We remove the old gate and posts if needed, dig and set new footings below grade, hang the gate on adjustable wind-rated hinges, and adjust the alignment until it swings and latches cleanly.
Sliding Gate Installation
Signs you need it
Your lot slopes or your driveway has limited swing clearance, and a slide gate would track parallel to the fence line instead of arcing into the yard.
What it costs in Rialto
Sliding gate installation in Rialto typically runs $2,000 to $6,000 including the track, rollers, gate panel, and posts.
How we do it
We pour a level track base, mount the roller track and posts, hang the sliding panel, and install the opener and safety edges if you’re going automatic.
What Gate Installation Costs in Rialto
| Item | Typical range in Rialto |
|---|---|
| Automatic gate installation | $2,500 – $7,500 |
| Driveway gate installation | $1,800 – $5,500 |
| Sliding gate installation | $2,000 – $6,000 |
Does a new gate installation include the opener and keypad in Rialto?
Automatic gate installations include the opener, keypad or remote controls, and safety components as part of the quoted package. We confirm exactly what’s in your price before any work starts – no surprises on the invoice.
How long does gate installation take in Rialto?
Most residential driveway gate installations take one to two days on site, depending on whether we’re replacing existing posts or pouring new footings. Sliding gates and automatic systems can add a day for the track base, power run, and programming. Call (866) 304-1321 for a time estimate on your specific project.
Brands We Service in Rialto
We work on FAAC, BFT, Linear, and Viking equipment regularly across Rialto, along with LiftMaster, DoorKing, Elite, Ghost Controls, and Mighty Mule. Because we’re gate specialists and not generalists, we diagnose these systems by their specific error codes and quirks, not by guesswork. See the full manufacturer list on our brands page. Most common replacement parts ship to our Chino shop within a day or two, which keeps turnaround tight for Rialto customers.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Rialto, CA
| Service | Typical range in Rialto |
|---|---|
| Gate repair service call | $80 – $120 |
| Gate hinge repair or replacement | $150 – $400 |
| Gate post reset or replacement | $300 – $900 |
| Gate frame straightening | $200 – $600 |
| Latch or lock repair | $100 – $250 |
| Full gate replacement | $1,200 – $6,000 |
| Automatic gate installation | $2,500 – $7,500 |
| Driveway gate installation | $1,800 – $5,500 |
| Sliding gate installation | $2,000 – $6,000 |
The main things that push a Rialto gate project toward the higher end are wind damage that’s been ignored for too long, posts that need to be re-poured because of settling or shallow original footings, and automation work that requires a power run from the house to the gate. Whatever the job, your price is quoted and agreed before we start – you’ll never get an invoice bigger than the number we gave you upfront.
Neighborhoods We Serve in Rialto
We take gate jobs across both Rialto ZIP codes – 92376 and 92377 – and know the streets well enough to predict what we’ll find before we arrive. Older tract areas tend to need post resets and hinge replacements, while the larger lots need full driveway gate installs and automation work.
- Las Colinas
- North Rialto
- Renaissance
- West Rialto
- Gateway
Typical response for most Rialto gate repair calls is same-day or next-day depending on the time of the call and how far along the wind event is. We schedule installations within a week or two, not months out.
Service Area – Cities Near Rialto
Lexington Gate Repair works all around the Inland Empire’s southwestern corner. If you’re just over the border in Bloomington, CA, up the road in Fontana, CA, or out toward Muscoy, CA, we cover those areas too. We also serve Grand Terrace, CA for gate repair and installation. Same wind corridor, same fix – we know what these gates are up against and we bring the right hardware the first trip.
Serving Rialto, CA — Our Local Coverage Area
We’re based in the Rialto area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Rialto
Most Rialto repair calls get same-day or next-day service. Wind events create a rush of calls, and we prioritize gates that won’t close or secure a property since that’s a real security problem, not just an inconvenience.
Some Rialto neighborhoods have HOA design rules for front-facing gates and fencing, and we recommend checking your CC&Rs before we order materials. For standard residential gate replacement that doesn’t change the footprint, permits are typically not required, but we’ll confirm the specifics for your street.
Yes. We’re gate specialists who handle the structural side and the automation side under one roof. If we arrive for a repair and find the opener needs replacement too – or the whole gate needs replacing – we quote both and handle the full job without handing you off to another contractor. Call (866) 304-1321 to schedule an assessment.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Rialto Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Veronica Martinez"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Nathan Novak"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Norma Rodriguez