Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Corona, CA
Gate installation in Corona means one of two jobs: rebuilding a sun-baked stucco-and-wood or vinyl gate on a 1980s-2000s tract-home driveway, or setting a heavy wrought-iron automatic slide gate into a sloped foothill lot in Eagle Glen or Sierra Del Oro where the Santa Ana winds and shifting terrain work against you. We’re Lexington Gate Repair, and gate installation, electric gate repair, and gate repair are the only jobs we take. When you need a Corona gate built right for this specific heat, wind, and soil, call (866) 304-1321.
Why Corona Homes Are Different
Corona’s gate work splits along a line most cities don’t have. The flat west side, the 92882 and 92878 ZIP roots, is packed with 1980s-2000s subdivisions: stucco homes, matching stucco-and-wood gates, vinyl gates, and hardware that has now weathered twenty to forty summers. Those gates dry, warp, crack, and pull loose from their posts because the inland heat here routinely passes 100°F and the air stays dry. A wooden driveway gate that baked in a Corona July for fifteen years does not swing like one from a coastal city. The wood shrinks around the hinge bolts, the stucco pilasters crack behind the post mounts, and the gate sags into the driveway.
Then go south and east into the 92881 and 92883 corridors: Eagle Glen, Sierra Del Oro, the edges toward Temescal Valley. Those hillside estates run long, sloped driveways, and the gates there are mostly wrought iron and automatic sliders. The fall Santa Ana events hit those exposed foothill lots hardest. We get calls after every wind event from homeowners whose slide gates bent at the mid-rail or whose cantilever wheels jumped the track because a gust caught the panel like a sail. You also get terrain settling on those sloped pads, which slowly pulls a slide gate out of level until the motor strains against the rack. The flat side of Corona does not deal with that failure mode, and the hillside estates do not deal with the sun-cured wood problems. Diagnosing a gate here means knowing which Corona you’re standing in.
Styles & brands we work with
Our Main Corona Services
Most Corona homeowners and property managers call Lexington Gate Repair for one of two things: a gate that won’t swing or slide right, and an electric opener that stopped responding. Here’s what each looks like in this city.
Gate Repair in Corona
On a Corona tract home, gate repair is usually a mechanical problem: a sagging wood or vinyl gate, rusted hinges, a failed post, or a latch that no longer lines up after the ground shifted through one too many dry-wet cycles. On the hillside properties, the same service more often means straightening or re-hanging a wind-bent iron panel, re-setting slide-gate rollers, or replacing the track-hardware that the terrain has pulled out of alignment. Corona’s sun and Santa Ana winds accelerate every one of these failures compared with a mild coastal city. We stock the common hinge, roller, and latch hardware for the gate types this city actually has, so most calls are one visit. See Gate Repair in Corona for the full breakdown.
Electric Gate Repair in Corona
Electric gate repair in Corona usually starts as “the gate stopped opening” or “it opens halfway and reverses.” The heat here is a real factor: control boards and capacitors fail faster on unshaded gate posts that sit in direct afternoon sun, and dust from the dry river corridor gets into limit switches and photo-eye lenses. On commercial and HOA systems around Corona, we work on FAAC, BFT, Linear, and Viking equipment, reading the specific error codes and sourcing the correct boards rather than throwing parts at the problem. Homeowners on the residential side mostly run LiftMaster, Ghost Controls, or Mighty Mule openers, and the same brand-specific approach keeps the repair to one trip. See Electric Gate Repair in Corona for diagnostics, codes, and pricing.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Corona
A new gate installation in Corona has to be engineered for this climate, not just bolted together. The housing stock tells the story: most of this city is 1980s-2000s planned subdivisions, stucco Mediterranean or Spanish-style homes whose original wood and vinyl driveway gates are now past their service life. The dry heat warps wood, cracks vinyl, and pulls post hardware loose. In the foothill lots of Eagle Glen and Sierra Del Oro, a new gate is more likely to be heavy wrought iron or an automatic sliding gate on a slope, where wind load and terrain movement decide how the gate gets built. Whether it’s replacing a failed gate on a flat lot or building a slide gate that will hold level through Santa Ana season, we handle it from the first measurement to the final limit-setting. That’s the full arc of Gate Installation: you get one gate specialist, not a handyman who hands the opener wiring off to someone else.
Automatic Gate Installation
Signs you need it
Your current gate is manually operated but your driveway is steep, long, or you’re tired of getting out of the car six times a day.
What it costs in Corona
Automatic gate installation in Corona typically runs $2,300 to $6,500 for the operator, arms, safety sensors, and integration on a residential gate, with commercial systems higher.
How we do it
We survey the gate weight and slope, spec the correct FAAC, BFT, Linear, or Viking operator for the duty cycle, mount and wire the motor, and then program the open and close limits, force settings, and safety edges.
Sliding Gate Installation
Signs you need it
Your lot has a short or sloped driveway where a swing gate would drag or block the approach, or you’re replacing a cantilever slider that the wind keeps knocking off its track.
What it costs in Corona
Sliding gate installation in Corona typically runs $3,800 to $9,000 depending on panel weight, track or cantilever design, and the operator, with the longer, heavier foothill gates at the top end.
How we do it
We set the track or cantilever posts on a level, compacted base, hang the panel to run true, install the rack and drive, then set limits and safety edges so the gate does not bind on a sloped Corona lot.
What Gate Installation Costs in Corona
| Item | Typical range in Corona |
|---|---|
| Standard single swing gate with opener | $2,300 – $4,800 |
| Automatic gate installation, residential | $2,300 – $6,500 |
| Sliding gate installation with operator | $3,800 – $9,000 |
How long does a gate installation take in Corona?
Most residential gate installations in Corona run one to two days on site. Wrought-iron slide gates on foothill lots may add a day for track and base work, and we confirm the timeline at the measure so you’re never guessing about your driveway being out of service.
Do I need a permit for a new gate in Corona?
Many Corona gate replacements do not require a permit, but automatic gates with vehicle detection, certain setbacks, or gates in HOA-managed communities often do. Lexington Gate Repair checks the requirements for your specific project and handles the paperwork that applies, and pricing is agreed before we start. Call (866) 304-1321 for a free measure.
Brands We Service in Corona
We work on your brand. In Corona, the systems we see daily are LiftMaster, Ghost Controls, and Mighty Mule on residential driveways, and FAAC, BFT, Linear, and Viking on commercial, HOA, and estate gates. We keep common boards, limit switches, remotes, and safety-edge parts stocked for these lines locally, which means most Corona repairs happen in one trip instead of a diagnosis visit followed by a parts order. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Corona, CA
| Service | Typical range in Corona |
|---|---|
| Gate repair, residential | $180 – $1,850 |
| Electric gate opener repair | $180 – $950 |
| Automatic gate installation | $2,300 – $6,500 |
| Sliding gate installation | $3,800 – $9,000 |
| Driveway gate, full replacement | $1,500 – $7,500 |
Two things push Corona gate prices toward the top of those ranges. First, the terrain: slope work, retaining walls, and long cable runs on foothill lots add labor and material. Second, the heat and wind mean we often have to rebuild post foundations that have dried, cracked, or been worked loose by Santa Ana gusts before a new gate can hang on them. Either way, the price is quoted and agreed before any work starts, so the number on the estimate is the number on the invoice.
Neighborhoods We Serve in Corona
Lexington Gate Repair works every corner of Corona, from the flat 92882 and 92878 subdivisions to the 92881 and 92883 foothills. We’re familiar with the gate types and failure patterns in each area, which means less time standing in your driveway explaining what’s wrong and more time fixing it.
- Sierra Del Oro
- Eagle Glen
- Temescal Valley edge
- South Corona
- Downtown Corona (92882)
Most Corona repair calls get same-day or next-day response, and our service area covers the full city. Call (866) 304-1321 and we’ll give you a straight arrival window.
Service Area – Cities Near Corona
Lexington Gate Repair is based nearby in Chino and serves the Corona area and its neighbors. If you’re just outside the city, we regularly work in Home Gardens, CA, El Cerrito Corona, CA, Eastvale, CA, and Norco, CA, where the gate issues follow similar inland heat and wind patterns.
Serving Corona, CA — Our Local Coverage Area
We’re based in the Corona area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Corona
Most Corona repair calls get same-day or next-day service, and we give you a straight arrival window when you call rather than a vague “sometime today.” (866) 304-1321 gets you the schedule and a free estimate.
Yes. We service the commercial and HOA equipment this city actually runs, including DoorKing, FAAC, BFT, and Linear systems, and we’re comfortable working under HOA timelines and access rules. The diagnosis is brand-specific, so we don’t waste HOA time swapping parts at random.
You get a written quote after we inspect the gate, the posts, and the opener if there is one. On repairs we tell you the fixed price before work starts. On installations we walk the site, note the slope and wind exposure, and line-item the gate, opener, and any electrical work. Call (866) 304-1321 to book it.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Corona Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Marco Garcia"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Veronica Martinez"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Nathan Novak