Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Norco
If your electric gate won’t open, grinds halfway, or the motor just hums without moving, you need a gate specialist who knows Norco’s specific setup. Most gates here aren’t decorative. They’re wide, heavy, and working daily around horses, trailers, and long gravel driveways. Electric gate repair in Norco typically runs $185 – $460 depending on the failure, and we do most diagnostics and fixes in a single visit. Call (866) 304-1321 for a free estimate, quoted before any work starts.
We’re Lexington Gate Repair, and we work exclusively on gates. No fencing side jobs, no garage doors, no general handyman calls splitting our attention. Our Electric Gate Repair team drives from Chino to Norco regularly, and we know the 92860 area well: the acreage off Sixth Street, the horse properties tucked behind Norco Hills, the ranch entrances along Corydon and Temescal. The zip code is compact, but the lots are not. That changes how gates fail and how they get fixed.
Why Lexington Gate Repair Is Norco’s Preferred Electric Gate Repair Company
Norco homeowners and property managers call us because we diagnose their gate correctly the first time. Nelson Arquette started this company around one principle: gate openers are not interchangeable, and treating them that way costs you time and money. Our techs work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When we arrive at your property, we already know your brand’s wiring logic, error codes, and common failure points.
Response time to Norco is typically under two hours on weekdays because we’re based just down the 15 in Chino. Property managers from multi-tenant equestrian facilities call us for FAAC and BFT hydraulic operators on sched patterns. Homeowners with Mighty Mule or Ghost Controls on solar call after their gate strands a horse trailer at the road. Both get the same thing: a gate specialist who arrives with parts for nine brands on the truck.
We don’t upsell. If your operator can be repaired with a new control board or capacitor, that’s what we recommend. If it’s old enough that repair doesn’t make sense, we quote a replacement transparently. From repair to replacement, one company, one contact.
Styles & brands we work with
Automatic Gate Repair in Norco
Automatic Gate Repair in Norco usually comes down to correcting power delivery and span mechanics on heavy ranch gates. The operator is rarely the first thing to fail. It’s the hinge post leaning after Santa Ana winds, the solar panel caked with dust, or a battery bank that never recovered from last winter’s rain cycle. We check all of it.
A typical automatic gate repair in Norco runs $210 – $430. That covers diagnosis, component replacement, and alignment on most residential swing and slide operators. Commercial or dual-operator systems on school or HOA entrances run higher, but we quote the exact number before any work begins.
Common calls: the gate opens but won’t close, the keypad works intermittently, the remote range dropped to ten feet, or the operator runs but the gate barely moves. Each has a known cause on LiftMaster and Viking systems, and we’ve fixed all of them on Norco properties.
Swing Gate Alignment and Hinge Repair
Wide swing gates on horse properties take a beating. Hinges sag, posts lean, and the operator has to work harder every cycle until something fails. We reseat posts in concrete when needed, rebuild hinge points, and rebalance the gate so the motor isn’t fighting the load.
Slide Gate Track and Bearing Service
Slide gates collect dust and debris in the track, especially during Norco’s dry summers. Grinding noises usually mean worn rollers, a bent rack, or debris packed into the drive gear. We clean, align, and replace worn components so the gate rolls instead of drags.
Electric Gate Motor in Norco
Electric Gate Motor failures in Norco fall into a few patterns. Solar-powered motors on long driveways often outlive their batteries, and the motor gets blamed. Hardwired motors on 30-year-old estate gates fail at the capacitor or limit switch. In every case, we test the motor under load before replacing anything.
Motor replacement in Norco typically runs $340 – $780 including labor, depending on whether you need a swing arm, slide operator, or heavy-duty hydraulic unit. We carry or can source motors for FAAC, BFT, Linear, and the other brands we service, so you’re not waiting on a generic part.
Solar Gate Motor and Battery Sizing
If your gate is 300 feet from the nearest outlet, a solar setup is the practical answer. But the panel and battery need to match your cycle count. Undersized batteries die early. Panels shaded by a barn or tack shed never recover. We check actual usage, relocate panels when needed, and size batteries for Norco’s sun and your gate’s daily cycles.
Operator Replacement on Existing Gates
Sometimes the gate and posts are fine, but the motor is done. We swap operators without selling you a new gate. The existing hinges, track, and mounting all get inspected first, and we quote the operator and labor as separate line items. You approve the price before we order anything.
Trusted Brands We Service in Norco
We work on your brand. That means when a Norco homeowner with a BFT operator calls, we don’t show up and tell them we only do LiftMaster. Our techs carry control boards, remotes, photo-eyes, and batteries for FAAC, BFT, Linear, and Viking systems specifically because those four are common on Norco’s commercial, HOA, and estate installations. If we need a less common part, our supplier network means most orders land in two business days, not two weeks. We’ll give you an honest timeline at the diagnosis appointment.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Norco Homes
- Solar batteries dying after cloudy or dusty stretches. Norco’s dry, windy summers coat solar panels in fine dust that cuts charging efficiency. Marine layer in late spring makes it worse. We test voltage under load and usually find the panel needs relocation or the battery bank needs upsizing for your gate’s actual cycle count.
- Swing gates sagging after heavy horse trailer traffic. A 16-foot steel gate with a trailer swinging through it daily puts enormous load on the hinge post. Santa Ana winds loosen the footing. The gate drags, the operator overheats, and the limit switch or motor fails shortly after. We fix the post first, not the motor.
- Corral and arena gate hardware seizing from dust and rain cycles. The latch you grab by hand every morning binds from rust and grit. Add an automatic operator to that same gate and the load climbs until the opener strips a gear. We repair the base hardware so the operator has a fighting chance.
- Control boards fried by power surges during wind events. Norco’s above-ground power lines and Santa Ana season make surge damage common. We see dead control boards on hardwired systems after the wind knocks branches into lines. Surge protection is part of our replacement recommendation, not an upsell.
Pricing for Electric Gate Repair in Norco, CA
Diagnostics run $89 and we apply that fee to the repair if you proceed. From there:
- Control board replacement: $165 – $310
- Photo-eye or safety sensor replacement: $120 – $210
- Remote and keypad programming: $75 – $140 per unit
- Hinge or post repair with concrete reset: $280 – $520
- Battery and solar panel service: $145 – $390
- Full motor replacement: $340 – $780
We quote your exact price after seeing the gate. That number is agreed before any work happens. No surprises on the invoice. Estimates are free. Call (866) 304-1321 to schedule a diagnosis.
We Also Serve Cities Near Norco
Our Norco service area covers the whole 92860 zip, but we also run calls to Eastvale, Home Gardens, Corona, and Jurupa Valley. If you have a property in any of those areas with a gate problem, the same team and same phone number apply. (866) 304-1321.
Serving Norco, CA — Our Local Coverage Area
We’re based in the Norco area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Norco
Yes, and most Norco acreage properties use solar gate openers for exactly this reason. The right panel and battery bank, sized for your gate’s daily cycles and Norco’s sun exposure, will run a heavy swing gate reliably. We recently repaired a LiftMaster swing operator on a half-acre horse property off Hamner Avenue where the gate had a solar setup that kept dying after two days of marine layer. The panel was shaded by a newly built tack shed and the battery bank was undersized for the cycle count. We relocated the panel, upsized the battery, and added a low-voltage cutoff so the gate wouldn’t strand the owner’s horse trailer at dawn. That’s the difference between a parts-swapper and a gate specialist. Call (866) 304-1321 to find out what your setup actually needs.
Sagging on a wide Norco swing gate is a post problem before it’s a motor problem. Horse trailers passing through daily put thousands of pounds of leverage on the hinge post, and Santa Ana winds loosen the footing over time. The gate drops, drags on the ground or the stop, and the operator works harder on every cycle until something burns out. We reset posts in concrete, rebuild hinges, and then recheck the motor. The repair holds because we fix the structure first.
Yes, and this is a safety point we never compromise on. Automatic gates exert enough force to seriously injure a person or animal. California code requires entrapment protection on automated gates, and a private ranch entrance is not exempt. We install and test photo-eyes, edge sensors, and reversing mechanisms on every repair where they’re missing or bypassed. A horse, a child, a dog: any of them can be in the wrong place when the gate cycles. We don’t leave a gate running without working safety devices.
The grinding itself isn’t unique to Norco, but the cause often is. Dry summers and seasonal dust coat the rack and drive gear with abrasive grit. Add winter rain that turns that dust into a grinding paste, and the pinion wears prematurely. We clean the rack, replace worn drive gears, and align the gate so it rolls smoothly instead of shaving metal. Regular rack lubrication extends the life of a slide operator, and we’ll show you what to use.
Yes, and Norco is one of the few places where we routinely do both in the same appointment. Driveway operators and corral or arena gates have different hardware needs: the automatic operator on your driveway gate runs on electronics, the corral gates need hinge, latch, and weld repairs. We send a technician who handles both. One visit, one invoice, no second contractor. Call (866) 304-1321 and tell us what’s on your list when you book.
Written by Nelson Arquette, Owner at Lexington Gate Repair, serving Norco and the surrounding area as a focused gate specialist. From repair to replacement, your gate diagnosed correctly the first time.