Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Placentia
An electric gate that won’t open or close isn’t just annoying. It’s a security gap, a blocked driveway, and a daily frustration. We’re Lexington Gate Repair, and we fix automatic and electric gate systems across Placentia’s 92870 and 92871 zip codes every week. If your swing gate is dragging, your opener is dead, or your keypad won’t respond, call us at (866) 304-1321. We diagnose the actual problem, not the symptom, and we’ll quote the repair before any work begins.
Why Lexington Gate Repair Is Placentia’s Preferred Electric Gate Repair Company
Most Placentia gate problems we see are unique to this city’s housing stock. The 1950s through 1970s tract homes, plus a pocket of early-1900s houses near the Old Town area, have side-yard driveways with gates hung decades ago. The original posts have settled in clay soil, the concrete has heaved from tree roots, and the operators are often legacy models with obsolete control boards. We’re familiar with those exact failures because we work on them here constantly.
We’re a gate specialist, not a generalist. Every call we take is about a gate. That focus means we carry the right parts for Placentia’s older systems, from LiftMaster swing arms to FAAC and BFT control boards. Nelson Arquette leads our repair team, and the crews he sends into Placentia know how to read a gate that’s been fighting settled concrete and warped wood for 30 years. You’ll get a straight answer about what’s worth fixing and what isn’t.
Styles & brands we work with
Gate Opener Repair in Placentia
Gate Opener Repair in Placentia usually means one of three things: the motor arm has worn out, the control board has failed, or the operator is fighting a gate that no longer swings true because the post or ground beneath it shifted. The third cause is the one we see most often in Placentia’s older side-yard driveways. A technician who only replaces the opener without checking the post footing and concrete apron will be back in six months for the same repair. We check all of it before we quote anything.
Operator Motor Replacement
Worn motor gears and stripped drive arms are common on gates that have been dragging for months. We replace the motor or the entire operator head depending on what your brand supports. For residential swing gates in Placentia, a typical opener motor replacement runs $350 – $650 including parts and labor.
Control Board Diagnostics
Legacy operators often have control boards that no longer match available replacement parts. We can sometimes retrofit a compatible board, and when we can’t, we’ll tell you honestly what a new operator costs before recommending one. Board replacement in Placentia typically runs $250 – $480 depending on the system.
Automatic Gate Repair in Placentia
Automatic Gate Repair in Placentia means diagnosing the whole system, not just the part that’s making noise. Your gate’s automation depends on the operator, the hinges or track, the safety sensors, and the ground underneath all working together. On older Placentia lots, the ground is often the problem. Tree roots push up concrete aprons, clay soil settles unevenly, and a gate that once swung clean starts dragging. Fixing the automation without addressing that drag means the system wears out faster.
Swing Gate Realignment
A dragging swing gate in an older 92870 side-yard setup is frequently caused by a concrete apron that has heaved under the gate’s arc. We re-set or re-grade the footing, re-hang the gate, and then verify the operator isn’t overworking. Realignment work in Placentia typically costs $225 – $450 depending on post condition and gate weight.
Safety Sensor Restoration
Automatic gates in California must reverse safely when someone or something breaks the sensor beam. Sun angles on Placentia’s west-facing front gates, plus dust and spider webs in the sensor housing, cause false readings. We clean, align, and when needed, replace photocells. Sensor repair runs $120 – $220 per pair including adjustment.
Trusted Brands We Service in Placentia
We work on your brand. Our Placentia service calls have covered FAAC swing operators on Old Town side-yard gates, BFT commercial systems at local HOA entrances, Linear openers on 1970s tract home driveways, and Viking units on larger estates in the hills above the 91. If your gate uses a LiftMaster, DoorKing, Elite, Ghost Controls, or Mighty Mule system, we service those too. We keep common parts for older FAAC, BFT, Linear, and Viking systems stocked on our trucks, which means less waiting when a control board or limit switch fails.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Placentia Homes
- Dragging gates on heaved concrete. Tree-root pressure and settled clay lift the concrete apron under many 92870 side-yard gates, so the gate scrapes or binds. Adjusting the hinges alone won’t fix it; the ground has to be addressed.
- Lean in wooden posts set in old concrete. Gates hung on cedar or redwood posts that were set in original concrete decades ago start to lean as the concrete cracks in Placentia’s clay soil. The gate pulls away from the latch, and the operator strains.
- Obsolete control boards. Operators from the 1990s and early 2000s often have boards that manufacturers no longer support. The board fails, and a direct replacement isn’t available, forcing a retrofit or full operator replacement.
- Santa Ana dust and sensor failures. Long dry stretches send fine dust into safety photocell housings, and the same winds can push a tall gate past its limit switch. Sensors need cleaning and alignment, and sometimes new wiring.
Pricing for Electric Gate Repair in Placentia, CA
Here are real numbers for Placentia’s market. A basic service call and diagnostic runs $75 – $125, credited toward the repair if you proceed. Hinge and post bracket replacement on a standard side-yard swing gate runs $180 – $350. Full opener replacement on a single swing gate runs $800 – $1,500 installed, depending on brand and gate weight. Slide gate operator replacement for commercial or long driveway systems runs $1,200 – $2,800. What changes the price is post condition, concrete damage under the gate, and whether your operator is current enough to retrofit. You’ll get a written quote before we start any work. Call (866) 304-1321 to schedule a free estimate at your Placentia property.
We Also Serve Cities Near Placentia
Our Electric Gate Repair team covers Placentia and the surrounding North Orange County area, including Brea, Anaheim, Fullerton, and Yorba Linda. If you’re in one of these cities and facing a gate that won’t close, we can help. For service details specific to your area, see Electric Gate Repair in Placentia or call us directly.
Serving Placentia, CA — Our Local Coverage Area
We’re based in the Placentia area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Placentia
In Placentia’s older side-yard driveways, a dragging gate is usually caused by the concrete apron under the gate heaving from tree-root pressure and settled clay, not by the hinges. The ground has lifted into the gate’s swing path, and no amount of hinge adjustment can fix that. We inspect the apron, the post footing, and the operator together, then correct the ground and the gate as one job. Call (866) 304-1321 for a diagnostic visit and we’ll tell you what’s really causing the drag.
It depends on the brand and the board’s age. Some legacy FAAC, BFT, and Linear boards can be retrofitted with a compatible aftermarket or used OEM board; others cannot. If the board is no longer supported and the motor is also worn, replacement is usually cheaper than a custom retrofit. We’ll give you an honest comparison of repair cost versus a new operator before any work starts. Estimates are free.
Yes. We service slide gates on commercial properties, HOAs, and residential lots wide enough for a track or cantilever system. Slide gate failures in Placentia often involve worn rollers, damaged track sections, or limit switch faults caused by debris in the track. Call (866) 304-1321 and we’ll dispatch a technician who works on slide gates regularly, not one who’s guessing.
Yes. In California, automatic gates must comply with UL 325 entrapment protection standards, which require safety devices such as photocells, reversing edges, or contact sensors that stop and reverse the gate when an obstruction is detected. Older gates installed before those standards were common often lack proper protection, and we recommend retrofitting them. We’ll inspect your Placentia gate’s safety system and tell you exactly what’s needed, with pricing before work begins.
A leaning post can usually be fixed without replacing the gate. We remove the gate, dig out the old footing, reset the post in new concrete, and re-hang the gate so it swings true. The gate itself typically only needs replacing if it’s rotted through or structurally cracked. In Placentia’s clay soil, a properly set post with a deep footing is the only long-term fix. Call (866) 304-1321 for a free assessment.
Need your electric gate working again in Placentia? Call Lexington Gate Repair at (866) 304-1321. We’ll diagnose the problem over the phone when possible, schedule a visit that fits your day, and give you a written price before any work starts. No upsell, no guesswork, just your gate fixed right.
Written by Nelson Arquette, Owner at Lexington Gate Repair, serving Placentia and North Orange County.