Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Fullerton, CA
Gate installation in Fullerton usually runs between $2,800 and $9,500 depending on the gate style, material, and whether you need a full automatic opener system. Fullerton’s mix of pre-1960 homes, Spanish Colonial Revival properties near downtown, and tighter original fence lines means many jobs are custom retrofits rather than simple swaps. At Lexington Gate Repair, we diagnose and install gates that fit Fullerton’s older properties correctly, from driveway gates to pool enclosures. Call (866) 304-1321 for a free estimate.
Why Fullerton Homes Are Different
Fullerton was incorporated in 1887, and that age shows in the gate work we do here. A large share of homes north of Chapman Avenue and around the downtown core date to the 1920s through 1950s, with many original side-yard gates still swinging on wrought-iron or redwood posts set in concrete that has since cracked or shifted. The 1950s and 1960s ranch tracts along the east side near Cal State Fullerton and south toward the 91 freeway present a different set of problems: wider driveway gates, older automatic opener wiring, and gate frames warped by decades of Fullerton’s dry inland heat.
Santa Ana wind events are a real factor here. We get calls after nearly every strong wind event in Fullerton for gates that have blown off their tracks, bent hinge plates, or snapped opener arms. The hot, dry summers dry out wood gates and loosen hardware, while winter rains and lawn irrigation cause rot at the base of posts, especially in older neighborhoods with mature landscaping. Pool enclosures are another common Fullerton call: California pool safety law requires self-closing and self-latching gates on properties with pools, and many Fullerton homes built before those requirements need retrofit hardware to comply.
Near downtown, the Craftsman and Spanish Colonial Revival homes often have narrow side yards and curved driveway archways. Standard off-the-shelf gate panels frequently do not fit those openings, so we handle custom re-hangs, hardware retrofits, and gates built to the actual measured opening. Knowing Fullerton’s housing stock means we arrive with the right parts and the right approach the first time.
Styles & brands we work with
Our Main Fullerton Services
Fullerton homeowners and property managers call us most often for two things: mechanical gate repair and electric gate repair. Here is what each involves in Fullerton specifically.
Gate Repair in Fullerton
Fullerton gate repair usually means fixing what decades of sun, Santa Ana winds, and irrigation have done to a gate. We re-hang sagging wood gates, replace rusted hinge plates and latch hardware, straighten bent steel frames, and rebuild failing posts. Many of the gates we repair in Fullerton hang on original posts from the 1950s and 1960s, so the real fix is often in the post and the hardware, not just the gate leaf. Read our full Gate Repair in Fullerton page for pricing and specifics.
Electric Gate Repair in Fullerton
Electric gate repair in Fullerton covers opener failures, safety sensor faults, remote and keypad issues, and gate travel problems on automatic systems. We service FAAC, BFT, Linear, Viking, DoorKing, LiftMaster, and other major brands, so we can pull the right error codes and get the diagnosis right instead of throwing parts at the problem. Older Fullerton homes often have outdated opener wiring or undersized power runs, which we identify and correct. See our Electric Gate Repair in Fullerton page for details.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Fullerton
Gate installation in Fullerton is rarely a simple drop-in job. The city’s older housing stock means many installations are custom-fit to existing posts, narrow side yards, or driveway archways that were never built to a standard gate size. We measure, quote, and build or order to the actual opening, then install the gate, hardware, and automatic opener if needed. For a full look at what the service covers, see our Gate Installation hub.
Automatic Gate Installation
Signs you need it
Your gate is manual and you want keypad, remote, or intercom access without getting out of the car, or your existing automatic gate is too damaged to repair cost-effectively.
What it costs in Fullerton
Automatic gate installation in Fullerton typically runs $4,200 to $9,500, including the opener, safety edges, and control board.
How we do it
We measure the opening and gate weight, spec the right opener for your brand and duty cycle, install the operator and safety devices, then test the full cycle to manufacturer spec.
Driveway Gate Installation
Signs you need it
Your driveway has no gate, or the existing driveway gate sags, scrapes, or cannot support an automatic opener without rebuilding the frame and posts.
What it costs in Fullerton
Driveway gate installation in Fullerton generally falls between $3,500 and $8,000 for a steel or aluminum gate with standard hardware.
How we do it
We check the driveway slope and post condition, set or reinforce posts as needed, then hang the gate square and test the swing or slide path before finishing.
Sliding Gate Installation
Signs you need it
Your driveway slopes uphill toward the house or you lack room for a swing gate to open inward or outward without blocking the sidewalk or the driveway.
What it costs in Fullerton
Sliding gate installation in Fullerton typically costs $3,800 to $8,500, including the track, rollers, and steel gate panel.
How we do it
We set the track on a level concrete pad, mount the gate panel and roller trucks, then install the opener, safety sensors, and end stops.
What Gate Installation Costs in Fullerton
| Item | Typical range in Fullerton |
|---|---|
| Automatic gate installation | $4,200 – $9,500 |
| Driveway gate installation | $3,500 – $8,000 |
| Sliding gate installation | $3,800 – $8,500 |
Fullerton prices tend to run at the higher end when we are working with original posts that need rebuilding, custom widths on older home lots, or long power runs from the house to a gate near the alley. You get the price in writing before any work begins, so there are no surprises on the invoice.
Do I need a permit for gate installation in Fullerton?
Most gate replacements and repairs do not need a permit in Fullerton, but new automatic gate installations with electrical runs often do. We check the current Fullerton requirements on your specific property before we quote.
How long does gate installation take in Fullerton?
Most standard installations finish in one to two working days. Custom gates, sliding systems, or jobs that require re-pouring post footings can take longer. We give you a clear timeline in the written estimate before work starts.
Brands We Service in Fullerton
We work on the gate opener brands most common in Fullerton, including FAAC, BFT, Linear, and Viking. Because we service these systems daily, we stock common control boards, safety edges, remotes, and limit switches for faster turnaround. See our brands page for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Fullerton, CA
| Service | Typical range in Fullerton |
|---|---|
| Gate repair | $150 – $850 |
| Gate opener repair | $185 – $800 |
| Gate opener replacement | $750 – $2,500 |
| Gate opener installation | $650 – $1,800 |
| Automatic gate installation | $4,200 – $9,500 |
| Driveway gate installation | $3,500 – $8,000 |
| Sliding gate installation | $3,800 – $8,500 |
| Gate wiring and conduit | $200 – $900 |
| Safety sensor repair or replacement | $125 – $450 |
| Hinge and post repair | $175 – $700 |
Fullerton pricing is driven upward by older post footings that need re-pouring, custom gate widths on narrow original side yards, and power runs that cross old concrete or brickwork. We quote the full price before any work starts, and that is the price you pay.
Neighborhoods We Serve in Fullerton
We work across all Fullerton ZIP codes, from the historic streets near downtown to the ranch tracts east of State College and the neighborhoods along Bastanchury. Our typical response window for Fullerton is same-day or next-day for urgent gate failures.
- Downtown Fullerton
- Sunny Hills
- The Trails
- Raymond Hills
- Coyote Hills
Service Area – Cities Near Fullerton
Lexington Gate Repair serves Fullerton and the surrounding North Orange County cities. If you’re in Anaheim, CA, La Habra, CA, Placentia, CA, or Brea, CA, we handle gate repair and installation there too. Call (866) 304-1321 to confirm coverage for your address.
Serving Fullerton, CA — Our Local Coverage Area
We’re based in the Fullerton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fullerton
Most Fullerton gate failures get same-day or next-day scheduling, especially if the gate is stuck open or will not close. Call (866) 304-1321 in the morning and we can usually have a technician to you that day.
Some Fullerton HOAs, particularly in planned communities, require design review before a new gate goes in. We can provide the spec sheet and material details your HOA needs, but the approval itself comes from the association.
Yes. We service commercial gate systems in Fullerton, including parking lot gates, apartment and condo entry gates, and HOA access control. We work on the same commercial brands we service in residential settings, including FAAC, BFT, and DoorKing.
Need a gate installed, repaired, or automated in Fullerton? Call Lexington Gate Repair at (866) 304-1321 for a free estimate. We will get your gate working right, quoted clearly, with no surprises.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fullerton Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
— Veronica Martinez"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
— Nathan Novak"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Norma Rodriguez