Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Pedley
Gate repair in Pedley usually means one of two calls: a driveway gate that won’t open, or a gate that’s sagging, sticking, or leaning on its post. On most Pedley properties we can diagnose the problem and complete the repair the same visit, because our trucks carry the parts for the opener brands and hinge and roller hardware we see most often in this part of Riverside County. If your gate is down, stuck, or making a grinding noise it didn’t make last week, call us at (866) 304-1321 and we’ll get a gate technician out to Pedley fast.
Why Lexington Gate Repair Is Pedley’s Preferred Gate Repair Company
Lexington Gate Repair is a gate specialist, not a general handyman service. Every technician on our team works exclusively on gate repair, electric gate repair, and gate installation. That concentrated focus matters in Pedley, where we see a lot of long rural driveway gates, solar-powered operators, and welded steel entry gates that look nothing like the standardized tract-home gates across the county line.
Pedley homeowners call us because we already know what we’re walking into. We know the properties off Pedley Road and along the Jurupa Valley edge where driveways run 200 feet or more. We know the older ranch-style homes with original chain-link and custom welded entries. And we know the county-level permitting reality that surprises people who just moved here from incorporated cities. Nelson Arquette leads our team, and his approach is simple: diagnose the actual problem, quote the fix before any work starts, and don’t sell you a replacement when a repair is the right call.
We carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so when your opener needs a control board, limit switch, or receiver, we usually have it on the truck on the first trip to Pedley.
Styles & brands we work with
Driveway Gate Repair in Pedley
Driveway Gate Repair in Pedley is what fills most of our schedule, and the call almost always starts the same way: the gate won’t move, or it moves halfway and stops, or it grinds and shudders before reversing. On an acreage property in the 92509 ZIP, a dead gate isn’t an inconvenience; it’s a broken entry point for a property that depends on the gate for security, privacy, and keeping animals in or out. A typical driveway gate repair in Pedley runs $185 to $520 depending on what failed. The work we do most is operator diagnostics, limit and force adjustment, hinge and post alignment, wheel and roller replacement, and rack and pinion or chain repair.
Automatic and Electric Gate Operators
Most Pedley calls involve a gate operator that stopped responding to remotes, keypads, or the hardwired open button. We work on your brand: FAAC, BFT, Linear, Viking, and the rest of the nine manufacturers we service, so we know the error codes and failure patterns for each. Replacing a residential operator control board in Pedley runs $220 to $480. Installing a new operator when the old one is beyond repair starts around $850 for a standard residential slide or swing system.
Slide Gates on Rural Driveways
Long, flat properties in Pedley favor slide gates, and those systems live and die by their rollers, track, and rack. We replace worn nylon rollers, reset rack sections that have pulled off their mounts, and fix the common problem where the gate runs fine cold but binds in the afternoon heat.
Gate Welding in Pedley
Gate Welding in Pedley is part of a lot of repair jobs, because so many of the entry gates in this area are custom fabricated steel or welded pipe-and-mesh designs that were built decades ago. When a weld cracks at a hinge, a lower corner rusts through, or a upright separates from the top rail, the gate doesn’t need replacing. Our techs handle on-site weld repair, sag correction on hinge posts, and reinforcement of rusted or cracked members. Typical weld and rust repair in Pedley runs $160 to $450 depending on how much steel has to be cleaned, cut back, and re-welded.
Rust Repair on Steel Gates
Winter rain in this part of Riverside County does real damage to untreated steel. We regularly see gates in Pedley with hinge welds that look fine from the outside but have rotted through from inside the tube. We cut out the bad section, weld in new steel, and paint or cold-galvanize the repair. The result isn’t pretty matching paint; it’s a gate that holds its weight again.
Hinge Post and Frame Sag Correction
Wooden gates swell and warp, but steel gates sag too when the post shifts in soft ground or the frame flexes under its own weight. We re-plumb posts, re-weld broken hinge barrels, and add mid-rail supports where the frame has started to rack. That’s the fix we did recently on a LiftMaster solar slide gate off a dirt road near the Jurupa Valley edge. The wood panel had swollen from winter rains and the gate was binding at the post. Our tech corrected the sag on the hinge post and replaced the rack and pinion, and the gate ran true again.
Trusted Brands We Service in Pedley
We’re a certified service provider for nine gate opener brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Pedley we regularly service Linear and Mighty Mule residential operators, and we see Viking and FAAC units on older acreage properties where the original installer worked in the commercial world. We carry local stock of common boards, remotes, and safety edge parts for these brands, which means fewer second trips and faster turnarounds for Pedley customers. If your opener’s make isn’t listed on a competitor’s site, call us anyway; if it’s an electric gate opener, we likely work on it.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Pedley Homes
- Wood gates that warp and bind in the summer. Pedley’s hot, dry inland summers and Santa Ana wind events pull moisture out of timber, twisting boards and throwing the gate off alignment. We shim, re-hang, and adjust latches so the gate closes without a fight.
- Steel hardware rusting out from winter rains. Untreated hinges, bolts, and gate frames in Pedley corrode fast once rain arrives. We replace rusted hardware with galvanized or stainless parts before a hinge shears and drops the gate.
- Solar gate openers failing in extreme heat. Properties off the grid in Pedley depend on solar panels and batteries, and Riverside County heat shortens battery life significantly. We replace and test batteries, panels, and charge controllers so the gate keeps opening even on a 105-degree day.
- Gates knocked out of alignment by livestock or vehicles. A grazing animal leaning on a field gate or a truck clipping a gate post shifts the geometry enough to make the opener strain. We realign the gate, reset limit switches, and reinforce the post so it doesn’t happen again the same month.
Pricing for Gate Repair in Pedley, CA
Gate repair pricing in Pedley is honest and predictable once we’ve seen the gate. A hinge and sag correction runs $140 to $320. A gate realignment with roller or wheel replacement is $180 to $400. Welding repairs on a steel gate run $160 to $450. A replacement automatic gate operator board is $220 to $480, and a full new slide or swing operator install starts around $850. The price you hear is the price you pay; we quote the job before any work begins, and if we find something else once we open the operator, we stop and call you. Estimates for Pedley gate repairs are free. Call (866) 304-1321 and we’ll get you an exact number.
We Also Serve Cities Near Pedley
Lexington Gate Repair works throughout the Jurupa Valley edge and the greater Riverside area. If you’re in Pedley, we’re your local gate team, and we also run regular service routes through Glen Avon, Sunnyslope, Rubidoux, and Riverside. Our Gate Repair service covers residential and commercial systems across all of these communities.
Serving Pedley, CA — Our Local Coverage Area
We’re based in the Pedley area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Pedley
Most gate repairs in Pedley do not require a permit. Replacement of a gate operator, hinge, roller, or welded section is considered maintenance. New gate installations and significant post changes fall under Riverside County building and safety rules, not a city desk, because Pedley is unincorporated. We can tell you during the estimate whether your specific job will need county review. Call (866) 304-1321 and we’ll walk you through what applies to your property.
A wood gate in Pedley sags because the post is moving or the gate frame itself is racking, not because the hinge bolts are loose. Hot, dry summers shrink and twist the timber, and the gate loses square. Retightening hinges buys a few weeks. We fix it by re-plumbing the post, adding a proper diagonal brace or turnbuckle, or replacing the frame member that’s warped beyond shimming. The repair typically runs $140 to $320.
Yes, we repair solar-powered gate systems throughout the 92509 ZIP, including the off-grid rural driveways east and north of Pedley’s developed core. We replace degraded batteries, test panels and charge controllers, and repair or replace the operator itself when heat or electrical issues have cooked it. Solar gate work costs the same labor rates as our other repair work, plus the specific parts your system needs. Call (866) 304-1321 and we’ll schedule a free estimate.
UL 325 compliance for an automatic gate in Pedley requires a monitored entrapment protection system, which usually means photo eyes or a contact sensing edge on the gate, plus audible and visual warning devices and proper force settings. Older systems in rural Pedley often lack these or had them disabled. We can bring your gate up to UL 325 during any service call and test the whole system while we’re there. The safety retrofit usually adds $150 to $350 to the repair bill depending on what’s missing.
We treat livestock properties in Pedley differently from a suburban driveway job. We check that the gate clears the ground along its full travel, that the opener’s force settings are correct for a wider, heavier gate, and that latches and stops will hold if an animal pushes against the gate. We also confirm the gate closes fully without drifting. Our techs work around animals with care, and we’ll coordinate gate access with you before we arrive. Call (866) 304-1321 to schedule.
Written by Nelson Arquette, Owner at Lexington Gate Repair, serving Pedley and the Jurupa Valley edge with dedicated gate repair and installation expertise.