Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Tustin
Gate repair in Tustin typically runs $150 – $450 for most mechanical and hinge fixes, while full electric operator replacement on a wide driveway gate starts around $600 – $1,200 depending on the opener and post condition. We’re Lexington Gate Repair, led by Nelson Arquette, and we work exclusively on gates: repair, electric gate repair, and installation. Our techs know the two very different Tustin gate markets better than anyone, because we’ve worked both for years. The mid-century iron and wood gates around Old Town and the 92780 core fail differently than the vinyl and aluminum gates in Tustin Ranch’s 92782 HOAs. We diagnose each one correctly the first time, and we quote the price before any work begins. If your gate is dragging, stuck, or won’t open, call us at (866) 304-1321.
Key Takeaways
- Tustin pricing: Sliding gate repair runs $180 – $500. Wrought iron hinge and post repair runs $200 – $600. Solar opener installation on rural acreage gates runs $900 – $1,800.
- We service both Tustin markets: Old Town’s vintage iron-and-wood gates and Tustin Ranch’s HOA-governed vinyl and aluminum systems.
- Brand-specific knowledge: We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
- Free estimates, upfront pricing, and the figure is agreed before work starts. No surprises on the invoice.
- One company, one crew, one phone call from diagnosis through repair or full replacement.
Styles & brands we work with
Why Lexington Gate Repair Is Tustin’s Preferred Gate Repair Company
Most gate companies in Orange County split their crews between fencing, garage doors, welding jobs, and gates. We don’t. Gate repair is all we do, and it shows in how fast we pinpoint a problem. Tustin homeowners call us because they’ve already had a handyman misdiagnose a gate opener as “fried” when the real issue was a bad limit switch, or because an HOA rejected a gate patch that didn’t match the approved color. Nelson Arquette built Lexington Gate Repair to be the specialist, not the generalist.
Tustin presents a specific challenge: a tech has to be fluent in vintage iron-and-wood repair and modern vinyl and aluminum systems within a few miles of each other. Our technicians know the gate failures common in 92780’s 1950s-70s ranch properties as well as the architectural-review restrictions in 92782. That local familiarity means fewer return visits and fewer wrong parts. We service the nine major gate opener brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so your gate gets diagnosed by someone who actually works on your brand.
Sliding Gate Repair in Tustin
Sliding gate repair in Tustin is one of our most common calls, especially on the long driveway approaches off Newport Avenue and the wider rural acreage lots north of Old Town. These gates are heavy, often 10 to 16 feet of steel or iron on a track, and Tustin’s dry inland heat combined with Santa Ana wind events accelerates wear on rollers, track brackets, and the operator’s gear drive. In Tustin, a typical sliding gate that’s binding or off-track costs between $180 and $500 to repair, depending on whether we’re replacing rollers, straightening a track section, or replacing an opener’s drive gear.
Track and Roller Failures on Wide Gates
On the wider sliding gates common to Tustin acreage entrances, the track takes a beating. Dry soil shifts after winter rain and summer heat, which settles the track, and the gate ends up dragging or jamming. We correct the track alignment, replace worn rollers with the correct capacity for the gate’s weight, and adjust the end stops. This is not a handyman job. A sliding gate that comes off its track is dangerous, and a misaligned track on a 12-foot steel panel can cause the operator to strip its gears in a single cycle. Leave this one to a professional.
Solar-Powered Sliding Operators
Many Tustin rural acreage entrances are too far from the street to trench power economically. We regularly install and repair solar-powered sliding operators with battery backup and safety photocells on these properties. The key is sizing the operator to the gate’s span and weight. Undersized operators fail repeatedly, and poor post footings cause the whole system to sag. We quote the full job before starting: operator, solar panel, battery, photocells, and the post or footing work if it’s needed.
Wrought Iron Gate Repair in Tustin
Wrought iron gate repair in Tustin is a specialty of ours, especially on the single-family ranch properties around Old Town and the 92780 core where original iron driveway gates were installed in the 1950s and 1960s. Iron gates in this market fail at the hinge post, not the middle. Tustin’s marine-layer mornings and occasional winter rain cause corrosion at the base, and the post rots at the footing. The gate then sags, drags, and eventually won’t latch. Expect to pay between $200 and $600 for typical wrought iron hinge and sag correction, with more for full post footing replacement or custom weld work.
Post Footing and Hinge Rebuilds
The original hinge posts on Tustin’s mid-century iron gates were often set without proper footings. After 60 years of dry heat and Santa Ana wind, the post leans, the gate sags, and the hinges bind. We excavate the old footing, set a new post, and realign the gate panel. On custom iron gates, we weld new hinge barrels to match the original style. The goal is a gate that swings cleanly and latches without dragging. These are repairs that only make sense on a property where the iron work has architectural or historical value worth preserving.
Rust Repair and Refinishing
Rust accelerates in Tustin’s climate for a specific reason: the marine-layer mornings deposit moisture on metal, then the inland sun burns it off, then the Santa Anas sandblast the surface. That cycle strips protective coatings and exposes raw steel. We grind rust, reinforce thin sections with welded patches where the structure is sound, and apply corrosion-resistant primer and finish. If the gate is in a Tustin Ranch HOA, we match the approved color palette before we paint. If it’s Old Town, the finish just has to be right, and we still quote it line-by-line before we start.
Trusted Brands We Service in Tustin
Your gate opener isn’t generic, and treating it that way causes misdiagnosis. We work on the brands most common in Tustin’s two markets: LiftMaster and Linear on residential driveways, FAAC and BFT on commercial and HOA vehicle access systems, and Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule across the full spectrum. On the rural acreage properties around Old Town and the unincorporated edges of 92780, we see a lot of solar-configured openers where FAAC and LiftMaster dominate. Tustin Ranch’s shared community gates lean toward FAAC, BFT, and DoorKing. We stock parts locally for all nine brands, so your repair doesn’t stall waiting on a shipping order.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Tustin Homes
- Sagging iron and wood gates on original posts: The hinge posts were set 50-70 years ago without proper footings, and the dry-then-damp Tustin soil cycle loosens them. The gate sags at the hanging side and drags.
- Rusted hinge barrels and latch hardware: Santa Ana wind strips protective coating, and marine-layer mornings add moisture. We see this constantly on central 92780 iron gates.
- HOA-mismatched vinyl and aluminum gates: In 92782, a replacement panel or hardware that doesn’t match the association’s approved style and color gets rejected. We order or match exact replacements before any install.
- Undersized operators on wide rural gates: A 14-foot farm gate on a residential-grade opener will strip gears in months. We size operators to the gate’s actual weight and span, and we handle solar where mains power isn’t practical.
Pricing for Gate Repair in Tustin, CA
For Tustin specifically, here’s what we quote: hinge and sag correction on an iron or wood gate, $200 – $600. Sliding gate track and roller repair, $180 – $500. Electric gate opener replacement, $600 – $1,200 for the operator plus labor. Solar opener installation on an acreage gate, $900 – $1,800. Weld and rust repair on a wrought iron panel, $250 – $700. These are real ranges for this market, not national averages. The final number depends on two things: the gate’s weight and span, and the condition of the posts and footings. We evaluate both on site, then we give you a written quote before any work begins. You approve the price first. Call (866) 304-1321 and we’ll come out for a free estimate, no obligation.
We Also Serve Cities Near Tustin
If your gate is on the border of Tustin and a neighboring community, we cover that too. We take calls from North Tustin, Santa Ana, Orange, and Villa Park, and our Gate Repair team knows the local gate types in each one. This Tustin page focuses on the specific gate failures we see here, but our pricing and brand coverage are the same across the area. One phone call covers whichever side of the city line your gate is on.
Serving Tustin, CA — Our Local Coverage Area
We’re based in the Tustin area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Tustin
Yes. For rural Tustin acreage gates with no mains power at the entrance, we install solar-powered gate operators with battery backup. The setup includes a solar panel, a battery bank, safety photocells, and a keypad or loop detector as needed. We size the operator to the gate’s width and weight, which matters on the 12- to 16-foot gates common off Newport Avenue. The solar install runs $900 – $1,800 on average in Tustin, and it avoids the cost of trenching power to the street. Call (866) 304-1321 for a site assessment.
Yes, we handle HOA color- and style-matching on Tustin Ranch gates routinely. In 92782, the architectural review board maintains an approved palette for gates and hardware, so we order or custom-match vinyl and aluminum panels to the association’s exact spec before installation. We’ve done this for shared community gates, walkway gates, and private driveway gates throughout Tustin Ranch. The matching adds a bit of lead time, but it prevents the rejection you’d get from a generic patch. We quote the full repair, including the matching, before work starts.
The hinge post rots or loosens at the footing, usually after 50 to 70 years of Tustin’s wet-winter, dry-summer soil movement. The post leans, the gate panel sags at the latch side, and the hinges bind. It’s a post problem, not a panel problem, and fixing it means excavating the old footing, setting a new post, and realigning the gate. In Old Town and the 92780 core, these are custom iron and wood gates worth preserving, so the repair preserves the original style. Expect $200 – $600 depending on whether the footing needs full replacement.
Yes. Tustin’s marine-layer moisture, intense sun, and Santa Ana winds create a rust cycle that’s hard on old iron gates. We grind the rust, weld patches where the steel has thinned, and apply a corrosion-resistant primer and finish. If the gate is in a Tustin Ranch HOA, we match the approved finish. If it’s Old Town, we match the original character. Rust repair on a Tustin wrought iron gate typically runs $250 – $700 depending on the extent and whether structural welding is needed. Call (866) 304-1321 and we’ll assess it on site.
Yes. Automatic and electric gates in Tustin must have operational safety sensors, typically photocells, that prevent the gate from closing on a vehicle or person. This applies to both residential and commercial/HOA gates, and it’s the same in Tustin Ranch and Old Town. If your gate’s sensors are bypassed, damaged, or missing, the gate is not safe to operate. We install UL-listed sensors, test the reversal function, and verify the system meets current safety requirements as part of any automatic gate repair. The sensor work is included in the quoted price for any repair that touches the operator.
Written by Nelson Arquette, Owner at Lexington Gate Repair, serving Tustin since our first call in the 92780 core.
Call Lexington Gate Repair in Tustin
If your gate is dragging, stuck, rusted, or refusing to open, call us now. We’ll diagnose it correctly the first time, quote the fix before any work starts, and handle everything from a hinge repair on an Old Town iron gate to a full solar opener install on a Tustin Ranch acreage entrance. We’re at (866) 304-1321. Free estimates, upfront pricing, and the number we quote is the number you pay.