Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Chino Homeowners
Gate installation in Chino typically costs between $1,800 and $12,000, depending on whether you’re adding a residential driveway gate or a commercial access system with automation. See our Gate Installation – Chino page for more details on local service. As Chino’s dedicated gate specialist, Lexington Gate Repair handles the entire job: site assessment, gate fabrication or sourcing, opener selection, concrete work, and final testing. Nelson Arquette founded this company on a simple premise: a gate that doesn’t open correctly isn’t a gate, it’s a wall. If your property sits along Chino’s busier corridors like Chino Avenue or Euclid, or your HOA in the Preserve requires specific access standards, call (866) 304-1321 and we’ll walk you through what your setup actually needs.
We’re not a fencing company that also hangs gates. We’re not a handyman with a welder. We’re gate people. Every technician on our crew works exclusively on gate systems, which means when you call us for a Gate Installation in Chino, the person who shows up has already diagnosed hundreds of installations across every brand we service.
Automatic Gate Installation
Automatic Gate Installation means adding a motorized opener system to a gate so it opens and closes without manual effort, triggered by a remote, keypad, sensor loop, or intercom. You need this when manual operation becomes a hassle, or when your property requires controlled access for vehicles. Lexington Gate Repair installs automatic systems on new gates and retrofits them onto existing ones. In Chino, a full automatic installation with opener, safety edges, and receiver typically runs $3,200 to $9,500 depending on gate weight, opener type, and power access.
Choosing Openers by Gate Weight
A gate that’s too heavy for its opener fails within months, not years. We calculate actual gate weight, wind load, and duty cycle before recommending a unit. In Chino’s Santa Ana wind conditions, an undersized opener on a solid steel gate is a call-back waiting to happen.
Power Runs and Conduit
Automatic gates need a reliable power source within code. We handle the electrical run from your panel to the operator, including conduit burial and transformer sizing. Most Chino homes have the panel on the opposite side of the driveway from the gate, which is exactly why so many DIY opener installs fail.
Styles & brands we work with
Gate Installation Services
Gate Installation pricing covers the complete job: removing an old gate if one exists, setting posts, installing the new gate, mounting and wiring the opener, and testing safety systems. You need this service when a gate is beyond repair, when you’re building a new home, or when you want to upgrade from a manual swing gate to an automated system. Lexington Gate Repair provides full turnkey service from first measurement to final programming.
Costs in Chino run from $1,800 for a basic single-swing manual gate to $12,000 for a commercial slide gate with full access control. The price is quoted and agreed before any work starts.
Residential Gate Packages
For most Chino homes we install ornamental steel or aluminum driveway gates with a swing or slide mechanism. Every package includes hinges, posts, and mounting hardware rated for the gate’s weight spec.
Commercial and HOA Systems
We install access-controlled gates for Chino business parks, storage facilities, and HOA communities. These include vehicle detection loops, keypads, telephone entry, and traffic-rated operators built for dozens of cycles per day.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation
Electric Gate Installation refers to installing a gate powered by an electric motor and control board, whether that’s a swing arm, a slide operator, or a hydraulic unit. You need this when you want push-button access from your car or phone, or when property security depends on controlled entry. Lexington Gate Repair installs electric gates for both residential driveways and commercial access points throughout Chino.
Expect to budget $3,500 to $10,000 for a complete electric gate install. The spread comes down to operator type and whether you need trenching for power or loop detectors. We quote everything upfront, before any concrete is poured.
Safety Edges and Photo Eyes
Electric gates in California must meet UL 325 safety standards. That means photo eyes, reversing edges, and proper force settings. We test every system we install against entrapment scenarios before we leave.
Operator Retrofit vs. Full Install
If your gate is structurally sound, we can retrofit an electric operator without replacing the gate leaf. That typically saves 40-60% compared to a full replacement. We’ll tell you honestly which route makes sense for your gate’s condition.
Driveway Gate Installation
Driveway Gate Installation is the process of installing a gate across the vehicle entrance to a residential property, typically at the property line or near the street. This is our most common residential job in Chino, particularly for homes on larger lots east of the 71 and in neighborhoods like the Preserve and Butterfield Ranch. Lexington Gate Repair provides our Gate Installation in Los Serranos and throughout Chino, with driveway gates that match your home’s architecture and handle daily use without constant service calls.
Most Chino driveway gate installations run $2,400 to $8,000 for a single swing gate with opener. Double swing and slide configurations run higher due to additional hardware and operator requirements.
Setback and Slope Considerations
A gate’s location affects how it tracks and swings. Steep approaches or limited setback change the hardware spec. We measure the actual site conditions rather than guessing from a photo, because a gate that binds on a slope is a chronic frustration.
Matching the Property
Your gate should look like it belongs to your house, not like a catalog afterthought. We match metal finish, picket spacing, and top rail detail to what’s already on the property. In Chino’s mix of Spanish revival and modern ranch styles, that detail matters more than most builders expect.
Sliding Gate Installation
Sliding Gate Installation means installing a gate that moves horizontally on a track and rollers rather than swinging open. It’s the right choice when you don’t have the driveway space for a swing gate’s arc, or when you have a steep grade that makes swinging impractical. Lexington Gate Repair installs sliding gates for residential side yards and commercial properties across Chino.
Chino sliding gate installations typically run $3,000 to $12,000, with the higher end covering cantilever designs and commercial operators. A cantilever sliding gate costs more than a track-style gate but avoids the constant problem of debris fouling a track in Chino’s wind.
Track vs. Cantilever
A track gate rolls on a rail at ground level; a cantilever gate rides above the ground on rollers mounted to posts. Cantilever is the better option on gravel or dirt drives because the track never gets clogged. We’ll recommend based on your surface and how often the gate gets opened.
Chino Wind Loads
A sliding gate catches wind differently than a swing gate. Solid-panel slides in high-wind areas put significant lateral stress on rollers and guides. We spec roller assemblies and post footings for the actual conditions on your property, not the mildest assumptions.
Gate Opener Installation
Gate Opener Installation is the process of mounting and programming the motor unit that automates a gate, whether it’s on a new installation or replacing a failed unit on an existing gate. You need this when a new gate goes in without automation, or when your current opener can’t handle the gate’s weight. Lexington Gate Repair installs openers from the brands we know inside out, including FAAC, BFT, Linear, and Viking.
Opener-only installation in Chino runs $1,200 to $4,500 depending on operator type and electrical work needed. We always quote the complete number, including wiring, programming, and safety device installation, before starting.
Programming Transmitters and Keypads
Every opener we install gets programmed for your remotes, keypad, and any vehicle-integrated system like Homelink. We test every input twice before we call the job done. Mis-programmed openers are the most common reason another tech gets called back.
Selecting the Right Operator
We match operator spec to gate weight, cycle rate, and power availability. A Viking or Linear slide operator belongs on a heavy commercial track; a residential swing may take a FAAC or BFT arm. The wrong pairing fails early, and we’d rather install it right once.
Gate Fabrication
Gate Fabrication is the process of building a gate to specific dimensions and design, rather than pulling a pre-sized unit off a shelf. You need fabrication when your driveway opening isn’t standard, when you want a specific ornamental pattern, or when existing constraints demand a custom build. Lexington Gate Repair fabricates gates for Chino properties, working from measurements taken on-site by the same team that installs them.
Fabricated gates in Chino range from $1,600 to $8,000 depending on material, size, and complexity of the design. The quote includes material, construction, primer, and finish coating. Every number is locked before fabrication starts.
Materials and Finish
We fabricate primarily in steel and aluminum. Steel gives you the strength for heavy-duty use; aluminum gives you corrosion resistance for Chino’s summer heat without the rust risk. Powder coating is standard on our fabricated gates, applied after all joints are welded.
Made to Measure, Not Made to Hope
Factory gates don’t account for the actual reveal, sag, or post plumb on your property. A fabricated gate does. We measure the opening in three places because no post is perfectly vertical and no driveway is perfectly level. The gate gets built to what exists, not what the drawing assumes.
Brands We Service
We work on gate equipment from eight major manufacturers: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That range matters because a Chino home with a Ghost Controls DIY opener needs different work than a Chino business park running a DoorKing or FAAC commercial system. We know each brand’s failure patterns, error codes, and part sourcing.
FAAC hydraulic and electromechanical operators are common on heavier residential gates; we keep their common boards and limit switches on our trucks. BFT and Viking appear more often on commercial and HOA gates in Chino, and we’re familiar with their loop detector and safety circuit protocols. Linear operators, popular in older Chino developments, have specific transformer failure points we know to check on arrival. Whether you have one of those brands or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate stalls mid-cycle and reverses. This often points to a failing safety edge or photo eye, not just a weak battery. The gate thinks something is in its path. Left unaddressed, it becomes a security gap you can’t predict.
- You hear grinding or metal-on-metal when the gate moves. Grinding usually means a hinge, roller, or chain sprocket is wearing out. Running it just accelerates the damage, and a seized hinge can twist a gate leaf beyond repair.
- The opener runs but the gate doesn’t move. That’s a disconnection between the drive mechanism and the gate itself. It could be a shear pin, chain, or gear failure. A tech can diagnose it in one visit; running the opener repeatedly won’t fix it.
- Your gate sags and scrapes the ground on the swing. Sag means hinges are wearing or the post has shifted. Forcing it closed grinds the bottom rail away and puts constant strain on the opener. This is a repair you shouldn’t postpone.
- The keypad or remote only works intermittently. Intermittent signal is often a failing receiver board or antenna, not a battery. If the gate opens sometimes and not others, you have a component failing, not a fluke. We track down the actual source instead of replacing batteries and hoping.
Our Process, Step by Step
- 1
Site assessment and measurement. We come to your Chino property, measure the opening, check the grade, look at power access, and talk through how you actually use the gate: daily commuter, delivery traffic, or commercial volume. This visit sets the spec for everything after it.
- 2
Quote with locked pricing. We give you a written number for the full install, including hardware, opener, electrical, and concrete. That’s the price you pay. No change orders for things we should have seen the first time.
- 3
Gate build or order. If we’re fabricating custom, the build happens to the measurements we took. If we’re installing a standard gate, we order from suppliers we know meet spec. Either way, the gate is matched to the site, not the other way around.
- 4
Installation and wiring. We set posts, hang the gate, mount the operator, run the electrical, and program every input: remotes, keypads, and safety devices. The gate is tested under load, not just cycled empty.
- 5
Final testing and walkthrough. We cycle the gate 20-plus times, trip the safety edges, test the photo eyes, and walk you through operation and basic maintenance. You get a gate that works the way it’s supposed to on day one and every day after.
How Much Does Gate Installation Cost in Chino?
A typical residential driveway gate installation in Chino runs $2,400 to $8,000 for a single swing gate with an opener. A slide or cantilever gate typically runs $3,000 to $12,000. A basic manual gate without automation starts around $1,800. For comparison, Gate Installation in Ontario pricing runs in a similar range, though Chino’s larger lots and longer driveway approaches tend to push material and conduit costs slightly higher.
What affects the price: gate material (aluminum costs more than steel; ornamental fabrication adds labor), gate weight and width (heavier gates need stronger operators and larger posts), power access (trenching 80 feet to your panel costs more than 20 feet), and automation type (a basic remote opener costs far less than a phone-entry system with a camera). The way to avoid overpaying is to get a quote that covers the complete job: hardware, electrical, programming, and safety compliance. Our estimates are free and include everything you’d need to make an informed decision without a surprise at the end.
Our Service Area Near Chino
Lexington Gate Repair covers Chino and the surrounding Inland Empire communities. We regularly install gates in Gate Installation in Los Serranos, plus Montclair, Pomona, Claremont, Upland, La Verne, Eastvale, Rancho Cucamonga, Norco, and Jurupa Valley. Response times vary by project type: residential assessments within a few days, and repair calls often same week. If you’re just over the Chino line, call anyway. We’ll let you know when we can be out.
Serving Chino, CA — Our Local Coverage Area
We’re based in the Chino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Chino
Gate installation is the process of setting a new gate across a driveway or entry point, including the posts, hardware, and optionally an automatic opener. It involves site measurement, concrete footing work, gate mounting, operator wiring, and safety testing. In Chino, it applies to residential homes, business properties, and HOA communities with controlled access. Lexington Gate Repair also handles Ontario Gate Installation and the complete job from first measurement to final programming.
Most single residential gate installations in Chino finish in one to two days. Custom fabricated gates add fabrication time, typically one to three weeks depending on the design and finish. Commercial slide gates with full access control frequently take three to five days including concrete cure time. We give you a timeline in the quote so you know what to expect before we start.
Gate installation in Chino typically runs $1,800 to $12,000 depending on gate type, size, material, and automation. A basic single swing gate starts around $1,800; an automated driveway gate with opener runs $2,400 to $8,000; a commercial slide gate with access control reaches $12,000. Call (866) 304-1321 for an exact quote, free of charge.
Yes. We install and service FAAC and BFT gate openers, along with LiftMaster, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our technicians work on these systems daily and know their specific error codes, part sourcing, and failure points. If your gate runs on one of these brands, or anything else, we can help.
We provide emergency service for gate failures that leave a property unsecured or inaccessible. For new installations, we schedule site assessments and installation dates rather than dispatching same-day. If your existing gate has failed and you need it secured, call us and we’ll get a tech out as soon as possible.
We stand behind the installations we do. Specific warranty terms depend on the equipment and the manufacturer, and we walk through those details in the quote so you know exactly what’s covered. Our focus is installing correctly the first time so the warranty is a backup, not a likelihood.
Clear the work area around the gate opening, move vehicles out of the driveway, and make sure we have access to your electrical panel. If you have landscape features near the gate opening, flag anything that might be in the way. We handle permits and utility marking as needed for the scope of the job.
Schedule Your Gate Installation Service in Chino Today
Your gate is the first thing people see and the first line of access to your property. If it’s time for a new one, call (866) 304-1321 and talk to a gate specialist, not a general handyman. We’ll schedule a free on-site assessment, give you a written quote, and get your gate installed right. No pressure, no obligation.
Written by Nelson Arquette, Owner at Lexington Gate Repair, serving Chino and the surrounding Inland Empire since day one.