Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Fontana
Gate repair in Fontana runs $180 to $650 for most hinge, alignment, and operator fixes, and our crews are usually at your property within one business day. We’re Lexington Gate Repair, and Gate Repair is all we do. Not fencing, not garage doors, not handyman work. If your swing gate is dragging the driveway off Sierra Avenue or your slide gate has bound up in a north Fontana community, call us at (866) 304-1321 and we’ll diagnose it correctly the first time.
Fontana sits at the foot of the Cajon Pass, and that changes how gates fail here. The Santa Ana winds that pour down the pass don’t just rattle your gate – they rack hinge posts out of plumb, grind windborne grit into rollers, and stress operator motors until they burn out. Most Fontana gate problems we see are wind-driven, and that’s exactly what we’re set up to fix. Estimates are free, and the price we quote is the price you pay before any work starts.
Why Lexington Gate Repair Is Fontana’s Preferred Gate Repair Company
We work on your brand. LiftMaster, DoorKing, Elite, Mighty Mule – we service all of them and five more, across residential driveways and commercial access systems. That multi-brand knowledge matters in Fontana because the city’s housing stock spans everything from 1960s tract homes with original swing gates to newer master-planned communities in the north with automatic slide gates. A technician who treats all gate openers as interchangeable will misdiagnose your system. We won’t.
Nelson Arquette leads our gate repair teams, and he built this company around one principle: a gate specialist beats a generalist every time. Our technicians focus exclusively on gates – electric gate repair, automatic gate repair, hinge and post work, and full installations. When you call us about a sagging wrought iron gate in southwest Fontana or a slide gate that’s binding in 92336, you’re talking to someone who has fixed that exact problem on that exact brand dozens of times.
We carry common parts for Fontana’s most installed opener brands in our service vehicles, which means fewer return trips and less waiting. That’s the practical advantage of a dedicated gate company. Call (866) 304-1321 for a free estimate.
Styles & brands we work with
Sliding Gate Repair in Fontana
Sliding gate repair in Fontana typically runs $350 to $800 depending on whether we’re replacing rollers, rebuilding the track, or addressing an operator that’s been straining against a gate that won’t roll clean. In the newer developments north of the 210, slide gates are the standard, and the windborne dust that comes down the Cajon Pass works its way into roller bearings and rack-and-pinion teeth faster than most homeowners expect. A slide gate that binds isn’t just noisy – it’s overloading the motor every cycle, and that motor will fail early if the mechanical issue isn’t corrected.
Roller and Track Rebuilds
When a slide gate starts grinding or jerking, the rollers and track are almost always the culprit. In Fontana’s dry climate, metal-on-metal wear gets accelerated by fine grit that settles into the track. We pull the gate, replace worn rollers, clean and re-level the track, and re-set the rack so the pinion engages cleanly. The job usually takes half a day, and you keep vehicle access to the driveway the whole time we work.
Operator Strain and Limit Issues
If your gate stops halfway or reverses unexpectedly, the operator’s limit settings may have drifted, or the motor may be overheating trying to move a gate that’s binding. We test the full travel, check the safety edges and photo eyes, and correct the mechanical resistance before re-setting limits. Fixing the gate and the operator together is the only way to stop the problem from returning in six months.
Wrought Iron Gate Repair in Fontana
Wrought iron gate repair in Fontana typically runs $220 to $600, which covers hinge replacement, weld repair, sag correction, and re-setting a post that’s worked loose. Southwest Fontana and the neighborhoods near the historic downtown are full of mid-century homes with steel swing gates on original posts, and after decades of Santa Ana gusts and settling soil, many of those posts are no longer plumb. When we’re called out for a dragging gate, the hinge post is often the real problem, not the hinges themselves.
Post Re-Setting and Sag Correction
On a block-wall property off Sierra Avenue in southwest Fontana (92335), our crew was called to a manual swing gate that had dropped and was dragging the driveway. The hinge post had worked loose in its footing after years of wind and soil movement, so we re-set the post in fresh concrete, straightened the frame, and did a proper sag correction on the original steel gate rather than just tweaking hinges. The gate now latches clean with room to spare for the shared driveway, and the homeowners kept vehicle access the entire time we worked.
Weld and Rust Repair
Fontana’s dry heat doesn’t rust gates as fast as coastal air, but windborne grit scours paint and exposes metal, especially at welded joints near the bottom of the frame. We grind back to clean steel, re-weld cracked joints, and treat rust before it compromises the gate’s structure. A repaired weld should look like it was never there.
Trusted Brands We Service in Fontana
Our technicians are factory-certified on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Fontana, we see a lot of LiftMaster operators on residential swing gates and DoorKing systems on commercial and HOA access points. We stock common replacement parts for these brands in our local service vehicles, so diagnostics and repairs happen faster. Whether your Mighty Mule drive won’t respond or your Elite slide gate operator is throwing error codes, we know the system-specific failure points and the correct parts to use. We don’t guess.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Fontana Homes
- Wind-driven hinge post failure. Decades of Santa Ana gusts rack a swing gate’s post out of plumb, so the panel sags and drags even when the hinges are new. In west- and north-facing gates, we often re-set the post rather than just adjusting hinges.
- Slide gate binding from windborne grit. Dust and grit that pours down the Cajon Pass gets into rollers, bearings, and rack teeth on north Fontana sliding gates. The gate starts straining the operator, and eventually the motor burns out.
- Rust and weld fatigue on steel frames. Wind-scoured paint exposes metal, especially at lower welded joints, and repeated wind loading flexes those joints until they crack. We see this most on older wrought iron gates in 92335.
- Shared driveway access conflicts. On tight Fontana rights of way, a broken swing gate can block a neighbor’s driveway entirely. We repair slide and swing gates without taking vehicle or pedestrian access away during the job.
Pricing for Gate Repair in Fontana, CA
Here’s honest pricing for Fontana gate repair work. Hinge and latch replacement runs $180 to $340. Post re-setting and sag correction runs $220 to $600. Slide gate roller and track rebuilds run $350 to $800. Operator repair and limit reset runs $250 to $550. Weld and rust repair runs $200 to $500. Your exact quote depends on the gate’s size, the brand of operator, and how much of the hardware needs to be replaced – but you’ll know that number before we start, and it won’t change mid-job. Estimates are free. Call (866) 304-1321 to schedule one.
We Also Serve Cities Near Fontana
Our gate repair trucks cover Fontana and the surrounding Inland Empire communities, including Bloomington, Rialto, Glen Avon, and Pedley. If you’re near the Fontana border in any direction, we can usually reach you just as quickly. Gate Repair in Fontana is our specialty, but the whole area gets the same factory-certified service and upfront pricing. Call (866) 304-1321 and we’ll let you know when we can be there.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Fontana
We fix both. In Fontana’s southwest neighborhoods, the hinge post is usually the root cause of a sagging gate, because years of Santa Ana wind and soil movement have knocked it out of plumb. We re-set the post in fresh concrete where needed, then straighten the gate frame and correct the sag on the panel itself. Just adjusting hinges on a bad post means the gate will drag again within a year. Call (866) 304-1321 for a free estimate.
Yes. Slide gates are the right solution for tight shared driveways where a swing gate would block a neighbor’s access, and we repair them regularly across Fontana. We service the full slide gate system – rollers, track, rack and pinion, and the operator – and we work without taking vehicle or pedestrian access away during the job. If your current gate can’t be salvaged, we can also install a new slide gate sized for the space. Call (866) 304-1321 to talk through your setup.
Fontana sits directly at the mouth of the Cajon Pass, so Santa Ana winds hit this city with more force than neighboring communities shielded by the hills. That wind racks hinge posts out of plumb, drives dust and grit into rollers and operators, and flexes steel frames at welded joints. Gates in Fontana’s older southwestern neighborhoods take the worst of it because they face the wind directly. Wind exposure shortens hardware life, and our repairs account for that.
Yes. Automatic gate operators in California must have working safety devices – photo eyes, safety edges, or both depending on the installation – and they must be tested and maintained. If your sensors aren’t working, the gate can close on a vehicle or person, and the operator will often behave erratically. We test and repair safety systems on every automatic gate repair call in Fontana, and we’ll tell you exactly what’s required for your setup. Call (866) 304-1321 for an inspection.
We can. Many Fontana properties have steel gate frames anchored directly into block wall masonry or set into concrete footings, so the repair method has to account for the wall structure. We re-set anchors, re-level frames, and repair the gate without compromising the block wall itself. This is common work in Fontana’s older housing stock, and we carry the right hardware to do it properly.
Written by Nelson Arquette, Owner at Lexington Gate Repair, serving Fontana and the Inland Empire with factory-certified gate repair and installation.