Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Norco, CA
Gate installation in Norco is different work than it is in most of Riverside County. We’re building and hanging gates sized for horse trailers, tractors, and daily livestock traffic, not ornamental driveway markers. A Norco gate has to swing wide, clear uneven ground, and keep working through summer heat, Santa Ana winds, and horses leaning against it. Lexington Gate Repair has served Norco since 2011, and the gates we install here are built for exactly those conditions. Call (866) 304-1321 when you’re planning a new gate or replacing one that’s failed.
Why Norco Homes Are Different
Norco is Horsetown USA, and that identity shapes almost every gate job we do in the 92860 zip code. Most properties sit on half-acre to multi-acre lots with detached barns, stables, corrals, and RV pads, often on well and septic. The entrance gate isn’t decorative. It’s infrastructure for moving horses, hay, and equipment in and out, sometimes several times a day. We regularly build gates up to 16 feet wide for trailer clearance, with frames heavy enough that a 1,200-pound horse leaning on them won’t pull the hinges out of square.
The climate works against gates here year-round. Norco sits in a hot inland valley, and summer temperatures above 100 degrees dry out and warp wood gates, crack paint, and loosen post footings in dry soil. Santa Ana wind events push hard against wide gates and stress every hinge point. Winter rains swell the ground and settle posts, then seasonal dust works into rollers and hinges. A gate that’s fine in March can be dragging by August. Repairs and installations here have to account for that cycle, which is why we use sealed bearing hinges, reinforced posts, and primers rated for sustained UV and heat.
Styles & brands we work with
Our Main Norco Services
Two service calls dominate in Norco: mechanical repairs on gates that see daily stress, and electric opener systems that fail in the heat or after wind events. Each has its own dedicated page with full pricing and repair detail.
Gate Repair in Norco
Sagging hinges, bent frames, broken latches, and welds that have cracked from years of horses leaning or pushing are the most common calls we get in Norco. Most of these gates are heavy metal or welded pipe, not light ornamental panels, so repair means cutting out the failed section, straightening or replacing it, and welding it back stronger than the original. We work on LiftMaster, DoorKing, Elite, Mighty Mule, and other major brands, and we diagnose before we quote. The full breakdown on what we fix and what it costs lives on Gate Repair in Norco.
Electric Gate Repair in Norco
Automatic gate openers fail in Norco heat more often than anywhere else we work in the region. Capacitors burn out, circuit boards overheat, and arms lose tension after thousands of open-and-close cycles in dust and direct sun. We service nine gate opener brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, which means we can pull the exact error codes and source the correct part for your system instead of guessing. See the full scope and pricing on Electric Gate Repair in Norco.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Norco
Gate installation in Norco means building a gate that fits the way this city actually uses its property. Most homes here have wide driveways sized for trucks and trailers, which means a 12-to-16-foot swing or sliding gate, not a standard 10-foot kit. Norco’s heat and dust also rule out cheap hardware: we set posts deeper than most contractors, use sealed bearings, and powder-coat or prime steel for years of direct sun. Gate Installation is one of our three core services, and in Norco, every new gate we put in is planned around horses, trailers, and daily use.
Driveway Gate Installation
Signs you need it
Your existing gate sags, drags on the ground, won’t stay latched, or a previous repair left it functional but ugly and you want a clean, secure replacement sized for your trailer and truck access.
What it costs in Norco
Driveway gate installation in Norco runs $1,800 to $12,000 depending on width, material, and opener integration, with most equestrian properties falling in the $3,500 to $8,500 range.
How we do it
We measure the opening and site conditions, fabricate or order the correct gate to width and weight, set posts in concrete below grade, hang and align the gate, and install and test all hardware, hinges, and latches before we leave.
Sliding Gate Installation
Signs you need it
Your driveway has limited swing clearance or a steep approach, or you want the reliability of a rolling gate that doesn’t fight Santa Ana wind pressure like a wide swing gate does.
What it costs in Norco
Sliding gate installation in Norco typically runs $2,500 to $15,000, with the upper range reflecting heavy commercial or long multi-vehicle gates with automation.
How we do it
We set the track and posts, build or order the gate panel to your exact opening width, install the rolling hardware and guides, and test full travel repeatedly so the gate rolls smoothly without binding in dust or heat.
What Gate Installation Costs in Norco
| Item | Typical range in Norco |
|---|---|
| Standard driveway gate installation (single swing) | $1,800 – $6,500 |
| Heavy steel or custom gate with opener | $4,000 – $12,000 |
| Sliding gate installation with track and hardware | $2,500 – $15,000 |
Prices in Norco run higher than the county average because so many gates here are oversized for trailer clearance and built from heavier steel to survive daily livestock contact. The price we quote is the price you pay – we confirm it in writing before any fabrication or site work begins.
Does gate installation in Norco require a permit?
Most residential gate installations in Norco don’t require a building permit if the gate is on private property and doesn’t block a public right-of-way, but setbacks and HOA rules can vary. Call us and we’ll tell you what your property actually needs before you pay for anything.
Can you install a gate opener during installation?
Yes. We install the gate and the electric opener as one project, which means the wiring and mounting arms go in while the gate is being hung, not retrofitted later. That saves you a second contractor and keeps the entire job under one diagnostic standard.
Brands We Service in Norco
We carry parts and diagnostics for LiftMaster, DoorKing, Elite, Mighty Mule, and the full nine-brand lineup at our brands page. Because we’re factory-familiar with these systems, we can usually identify a failed opener by its error codes and have the correct Norco-ready part on the truck same day.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Norco, CA
| Service | Typical range in Norco |
|---|---|
| Hinge and latch repair | $150 – $400 |
| Welded frame repair | $250 – $700 |
| Full gate replacement (materials and labor) | $1,800 – $8,500 |
| Gate opener motor replacement | $500 – $1,200 |
| Circuit board replacement | $300 – $800 |
| Opener arm repair or replacement | $250 – $600 |
| Safety sensor repair or realignment | $150 – $350 |
| Keypad and intercom install | $400 – $1,200 |
| Full electric gate system install | $2,000 – $15,000 |
Two things push Norco pricing above the regional average. The first is gate size: many Norco gates are built for trailer and equipment access, so materials and concrete work cost more. The second is heat-rated hardware, which we specify on every quote because cheaper components fail quickly in this climate. Every quote is confirmed in writing before we start, and you’ll never see a surprise line item.
Neighborhoods We Serve in Norco
We work across all of Norco, 92860, from the older ranch properties near the Santa Ana River to the larger equestrian lots east of Hamner Avenue. Response times vary by the day’s routing, but most Norco calls are reached the same day.
- Norco Hills
- Norco Ridge
- Horsetown neighborhoods east of Hamner
- Riverfront and older ranch lots
Service Area – Cities Near Norco
Our Norco team also covers neighboring cities including Eastvale, CA, Home Gardens, CA, Corona, CA, and Jurupa Valley, CA. If you’re on the edge of Norco or manage properties in a bordering city, call and we’ll confirm the schedule for your area.
Serving Norco, CA — Our Local Coverage Area
We’re based in the Norco area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Norco
Most Norco repair calls are reached the same day, often within a few hours, depending on where our techs are in the Riverside routing. If your gate won’t close and you have horses out, tell us on the phone and we’ll prioritize it. Call (866) 304-1321 for a free estimate.
We do. Many Norco neighborhoods have HOA rules about gate height, color, and style, especially near the hills and newer developments. We’ve worked with those boards before and can build to the exact spec your HOA requires without slowing the job down.
Yes. Many Norco properties are on well and septic with long, unpaved driveways. We bring our own power for welding and fabrication, set posts without utility conflicts, and build gates that clear uneven ground and drainage channels properly.
If your Norco gate is failing, sagging, or needs full replacement, call Lexington Gate Repair at (866) 304-1321. We’ll give you a clear, written estimate before any work starts, and we’ll build or repair the gate the way Norco actually uses it.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Norco Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
— Grace Nguyen"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
— Rosa Morales"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Priya Rao